Pearl's P.R.O. Softshell WxB Shoe Covers are fully waterproof, insulated protection against the worst weather you can ride in. The shell is Pearl's WxB 2-layer stretch fabric that is waterproof and breathable. Then, you have Primaloft insulation for serious warmth without bulk. They're also equipped with tall cuffs to seal out the elements, cleat cutouts in the tough Kevlar bottom, reflective accents for visibility and 2-stage hook-and-loop closures for a secure fit and easy on/off.
Castelli's Ultra Shoe Covers are made of Gore's windproof and water-resistant Windstopper X-Fast 2 microfleece fabric for excellent warmth in the cold and wet. They're anatomically cut and boast high cuffs to keep chilly air out. In back, full-length waterproof zippers make for easy on/off, and the reflective stripes add a touch of visibility.
Fend off numb feet this winter with Endura's Freezing Point Overshoes. The fleece lined neoprene construction keeps warmth in and protects your feet from the biting cold. Plus, these durable covers offer a snug fit, reflective detailing, and a rear zipper so they're easy to slip off post-ride.
For optimum power transfer to the bike, leg power needs to be effectively converted into propulsion. The IP3 insoles from Ergon support and stabilize the power transfer from the legs and feet straight to the pedals. Due to the patented stabilization delta, a natural foot position is achieved through three points resulting in an efficient and comfortable motion sequence while pedaling. Made in Germany and developed with insole specialist Solestar.
Fend off darkness and soggy feet with Luminite II Overshoes. Crafted from seam-taped, waterproof fabric, these covers feature rugged Kevlar soles at the toe and durable flatlocked seams. They are suitable for all kinds of cycling footwear and cleats because they are fully open at the sole. The back heel features Velco fastenings for an adjustable fit. And, the Luminite II Overshoes are surrounded in 360-degree reflective trim for excellent visibility.
Crafted from tough, waterproof neoprene, Endura's MT500 II Overshoes will keep your feet dry and warm. These booties feature waterproof rear zips and a welded center seam for a snug, smooth fit over your mountain bike shoes. The grooved rubber toe caps help on muddy slopes and steep climbs while the Kevlar soles withstand tough terrain. There are also reflective details for enhanced visibility. Say goodbye to muddy shoes!
If you’re riding the Alpineduro, you’re probably looking for big adventures in rugged conditions. With the Alpineduro Rain Gaiters, you can now keep the adventures going even in the wettest weather conditions. The Alpineduro Rain Gaiters have a waterproof four-way stretch upper with a lace hook and a YKK locking zipper. Reflective details help keep you visible at night, and the heavy-duty belly strap keeps the gaiter in place.
Keep those toes warm and dry in Garneau's H2O Extreme Shoe Covers. Waterproof polyurethane backed with toasty microfleece hold the cold at bay, and neoprene cuffs with Velcro closures make the fit nice and secure. Sealed seams keep the water away, Kevlar material on the soles increases the durability, and reflective accents help you stay visible in low-light riding conditions.
Pearl Izumi's thinnest, lightest and most aerodynamic shoe cover is perfect for racing or riding in cool, windy conditions. It's made with a breathable P.R.O. Barrier Lite fabric that stretches to optimize your aero advantage while keeping your feet dry and comfortable. It also features a zippered rear closure for improved aerodynamics. Features: - P.R.O. Barrier Lite fabric provides lightweight wind protection and water resistance - Wind tunnel tested for aerodynamics - Zippered heel closure for improved fit and improved aerodynamics - Recommended for road shoes with external cleats - Upper: 50% nylon 40% polyurethane 10% elastane; Bottom: 59% nylon 25% Kevlar aramid 16% polyurethane; Imported
The Transfo 3D Insole is quite simply the lightest insole on the market. Offering a simple and easy way of customizing the arch support that your foot receives, this is an innovative means of improving overall comfort on the bike and reducing the chance of long-term injury. Simply remove and replace the inserts based on how much arch support your foot requires. The non-slip surface of the underside of the insole locks it in place against the footbed of the shoe, while the Ergo Air ventilation system preserves airflow. The insole can be adapted to all types of cycling shoes, for both men and women. - Unisex - Arch support: Low/Med/High adapted arch profile ensures maximum foot contact for optimal support - Ergo Air: Provides through-and-through ventilation - Removable arch: Patent-pending anchoring system allows for an easy and customized adjustment - Under insole: The non-slip surface maintains insole in place
Power saving, round pedal stroke and a healthy foot arch make the SQlab insoles a must for every foot in a cycling shoe! Suitable for all cycling shoes, but also for normal shoes which are used for cycling, as well as for other uses. Developed in collaboration with ex-runner-up triathlon World Champion and foot expert Bjorn Gustaffson, SQlab has developed insoles that support the specific requirements found in cycling for the weaknesses of the respective foot type.
$24.00 - $40.00 $40.00 Up To 40% Savings
Boasting Garneau's WindDry fabric and 3mm of windproof neoprene, the Bimax Shoe Covers create a barrier between you and the wind, wet, and cold. Reflective accents enhance visibility, while rear seam-sealed zippers provide easy on/off access and extra protection against water!
$15.00 - $30.00
Sidi's Caliper Buckles replace any Sidi ratchet system to get you back on the road. With precise tightening and simple loosening mechanisms, the Caliper Buckles keep your shoes secure. Retrofitting them onto older Sidis requires replacing the straps with Caliper Straps (sold separately).
$24.95 - $29.00
The Ergon TP1 Pedal Cleat Tool is the first tool for precisely and easily adjusting cycling shoes cleats. The ergonomically correct position of the feet on the pedals plays a crucial role in injury prevention and is also important for maximizing both performance and comfort.
The ATAC Easy cleats are specifically for the mountain bike pedal and City Bike range of TIME (LINK, MX and XC range). The release angle of 10-degrees is easy for riders who want a quick step out. - Weight: 44g/pair
Compatible with all fi'zi:k R1B shoes. - Color: Black - Materials: Plastic - Small: (39-44.5) - Large: (45-48)
The classic must-have ELITE Thermal Toe Covers are updated with reflective logos. Features: ELITE Softshell provides superior wind and water protection Simple pull-on design Reflective elements for low–light visibility Recommended for road shoes with external cleats Top: 70% nylon, 15% spandex, 15% polyurethane, Bottom: 93% nylon, 7% spandex, Imported.
Xpedo cleat set for Xpedo M-Force pedals - Weight: 65g per set with hardware
- Shimano SPD-SL-style - Engineered thermoplastic injection body - Anti-slip walk pads - Fixed position with no float
- Made of wind and waterproof latex to keep your feet warm and dry
- Lightweight and flexible, No need for zippers or velcro that cause leaking
- Smooth form fitting design aids in aerodynamic efficiency
- Easily fits into jersey pocket or saddle bag
The in-between solution to protect your feet on those chilly days. FABRICS: -ISO LITE: Provides warmth in cool weather -ANTISLIP 3 MM NEOPRENE : Isolates from cold, provides warmth and durability DETAILS: -Cleat opening under sole -Flatlock seams: Enhanced comfort -Reflective puller
The Xpresso Free float cleats have been developed for the TIME Xpresso Road bike pedal range. They allow angular and lateral freedom in order to respect the natural movements of your legs and joints. You can also adjust the Q-factor (by switching the cleats), in order to optimize performance following 3 points: security, ergonomics and performance. The Bi-material brings more durability when walking with the cleats. - Weight: 85g/pair
- Shimano SPD-SL-style - Engineered thermoplastic injection body - Weight of 24 grams per cleat - 4.5-degree floating arc
The Keo Cover protects your cleats while walking. They are compatible with all Keo Grip cleats and Keo Cleats. – Cleats protection – Anti-slip – Compatible with all cleats
LOOK KEO compatible road cleats - Unique 2 piece design allows you to change cleats without losing position - Durable, high traction walking surface - Hardware included
Eliminate cleat wear and improve walking comfort and safety with these Exustar cleat covers. - Compatible with Exustar cleat C01, C03, and C05 - Durable and flexible rubber - Can be used with either floating or fixed position cleats - Weight of only 14 grams/pair
- SPD compatible - Single release - Hardware included
Eliminate cleat wear and improve walking comfort and safety with these Exustar cleat covers. - Compatible with Exustar cleat ARCR2, BLKR2 - Also compatible with Look Keo system - Durable and flexible rubber - Weight of only 45 grams/pair
Exustar Cleats compatible with Look Keo System - Engineering carbon fiber injection body - Weight of 24 grams per cleat - 7-degree floating arc
Eliminate cleat wear and improve walking comfort and safety with these Exustar cleat covers. - Compatible with Look Keo System - Durable and flexible rubber - Can be used with either floating or fixed position cleats - Weight of only 45 grams/pair
Page 1 of 2 Next page