Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Parts & Accessories

$65.00
You need to get out on your bike even in terrible weather. Fitting in an early commute or a mid-winter ride is easier when you're warm, comfortable, and visible. Keeping your head warm in bad weather can be the best way to fend off the elements.
- GORE-TEX Product: durably waterproof, windproof and extremely breathable
- Reflective band
- Elastic hem
- Reflective logo
- Durably waterproof
- Extremely breathable
- All weather conditions
- Engineered for Cycling
- Weight: 0.8 ounces

$45.00
The ultimate commuter helmet cover combrines a fully reflective fabric, with water and wind protection.
- Sugoi's fully reflective and waterproof Zap fabric is designed for high visibility in low light
- Two sizes to offer a wider range of fit possibilities

$42.00
The Asteroid fits all new and older Bern helmets with a two-hole mount located in the rear of the shell. USB rechargeable.
- 12 Lumens
- Micro USB rechargeable
- 3 Light Modes (Flash 24 hours, Pulse 6.5 hours, Steady 5.5 hours)
- Water Resistant
- 16 grams
- 26mm tall, 39mm wide, 20mm thick (w/o bracket)

$41.00
Strap dividers for thick Lazer helmet straps
COMPATIBILITY
- Blade+ MIPS
- Blade+
- Tonic MIPS
- Tonic
- Coyote MIPS
- Coyote
- Chiru
- Next+
- Cameleon MIPS
- Compact DLX MIPS
- Compact DLX
- Compact
- J1
- Gekko MIPS
- Gekko
- Lil'Gekko MIPS
- Lil'Gekko
- ATTACHMENT: strap
- MATERIAL: Nylon

$41.00
A helmet mounted taillight is an ideal way to help make sure you are seen in low light conditions
The Lazer Universal LED mounts directly to any Lazer KinetiCore helmet. It can mount to any other helmet by using the included Velcro strap.
COMPATIBILITY
- Cityzen KinetiCore
- Jackal KinetiCore
- Nutz KinetiCore
- Pnut KinetiCore
- Strada KinetiCore
- Vento KinetiCore
- BATTERY TYPE: USB rechargeable
- RECHARGE TIME: 2.5 hours
- RUN TIME: 54 hours
- LUMENS: 40 lumens
- ATTACHMENT: Direct mount to Lazer KinetiCore helmets. Velcro mount to any helmet.
- WEIGHT: 15g

$41.00
Magnetic mount lens for Lazer Urbanize helmet
The integrated lens is an integral part of the Urbanize helmet. It can be stored on the helmet surface using the magnetic docking when not in use.
COMPATIBILITY
- Urbanize NTA MIPS
- ATTACHMENT: magnetic
- WEIGHT: 54g
- MATERIAL: Polycarbonate

$40.00
When chilly, soggy weather rolls through, Garneau's H2 Helmet Cover keeps you both warm and dry. It's made from a polyurethane-coated spandex that's water-resistant. The sealed seams and a snug stretch band that fits easily over your helmet also keep water from seeping in. Plus, when the sun's not shining, the high-visibility yellow color and reflective accents will help make you visible to others.
Technical Details:
- Fabric : Polyurethane-coated Carbon WR spandex
- Seams: Sealed seams: Keep you dry
- Visibility Features: Reflective accent

$32.00
The Proviz REFLECT360 waterproof helmet cover is adjustable and designed to fit over all standard size cycling helmets.
It is made from 100% reflective material and is fully waterproof, seam-sealed, and lightweight. It is elasticized around the edges, which can be adjusted to ensure a secure fit around your particular helmet model, while the reflective materials help to ensure your position on the road is more easily seen at night. It is perfect for commuting in wet winter weather.
About the fabric: The fabric used for the REFLECT360 range is highly technical. During daylight, it is a modest grey color. At night, when the fabric picks up an external light source, e.g. vehicle headlights, it gives "astonishing reflectivity" (quote: Cycling Active Magazine). The material is CE EN 20471 certified.
- The Proviz REFLECT360 waterproof helmet cover is made from 100% reflective material
- Fully waterproof, seam-sealed, and lightweight
- Adjustable elastic edge easily fits a wide variety of helmet sizes and shapes
- Reflective material helps to ensure your position on the road is more easily seen at night
- Material appears grey during the day and reflectively shines a brilliant white at night

$30.00
The Roc Loc 5 Led Light is one of the easiest and most powerful ways to increase visibility and safety on the road.

$29.99
Looking for a great around town lighting system at a very reasonable price? The Duplex is just that. Providing both headlight and rear light in one unit, the Duplex easily mounts to your helmet with an included rubber strap and provides up to 100 hours of run time on only two AAA batteries. The light is easy to operate and can be switched between constant beam and flashing modes simply by pressing and holding a button. Making yourself visible in city traffic can help motorists see you better, and a good helmet-mounted light that is worn on your head, up and away from the distraction of car lights, can really make you stand out in a sea of vehicles. Use your head, and use a light.
Features
- Dimensions: 70.5 x 28.5 x 23 mm
- Weight: 51.5 g (with bracket and batteries)
- Light source: White LED x1, Red LED x1
- Battery: AAA alkaline battery x2
- Mount: Rubber band (Long)
Modes/Run Time
- (Front) Constant mode (15 lumens): 100hrs
- (Rear) Constant mode (10 lumens): 100hrs
- (Front) Flashing mode (30 lumens): 100hrs
- (Rear) Flashing mode (10 lumens): 100hrs

$29.00
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets!
The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride.
Sizing:
- Small = 52 – 56cm
- Medium = 55 – 59cm
- Large = 58 – 61cm

$29.00
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets!
The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally, the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride.
- COMPATIBILITY: Z1 MIPS, Z1
- ATTACHMENT: Z1 helmet
- WEIGHT: 45g
- MATERIAL: Polycarbonate

$25.00 - $29.00
A user adjutable cap for the Bullet 2.0 in order to provide airflow or maximize aerodynamics.
- COMPATIBILITY: Bullet 2.0
- ATTACHMENT: Bullet 2.0 helmet
- WEIGHT: 34g
- MATERIAL: Polycarbonate

$29.00
A helmet-mounted taillight is an ideal way to help make sure you are seen in low light conditions.
- COMPATIBILITY: Cameleon MIPS
- RECHARGE TIME: 2 hours
- RUN TIME: 24 hours
- LUMENS: 5.2 lumens
- ATTACHMENT: Rear vent
- WEIGHT: 19g
- MATERIAL: LED light

$29.00
A helmet-mounted taillight is an ideal way to help make sure you are seen in low light conditions.
- COMPATIBILITY: Gekko MIPS, Gekko, Lil'Gekko MIPS, Lil'Gekko
- BATTERY TYPE: USB rechargeable
- RECHARGE TIME: 2 hours
- RUN TIME: 24 hours
- LUMENS: 5.2 lumens
- ATTACHMENT: Rear vent
- WEIGHT: 19g
- MATERIAL: LED light

$28.00
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets!
The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally, the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride.
- COMPATIBILITY: Blade+ MIPS, Blade+, Blade, Blade MIPS
- ATTACHMENT: Blade or Blade+ helmet
- WEIGHT: 45g
- MATERIAL: Polycarbonate

$25.00
A closed cap for the Bullet 2.0 in order to block airflow and maximize aerodynamics.
- COMPATIBILITY: Bullet 2.0
- ATTACHMENT: Bullet vent
- WEIGHT: 21g
- MATERIAL: Polycarbonate

$25.00
Venturi technology accelerates the airflow through the helmet.
By creating an active air draw at the rear of the helmet, the Venturi cap increases airflow through the Lazer Bullet 2.0.
- COMPATIBILITY: Bullet 2.0
- ATTACHMENT: Bullet 2.0 helmet
- WEIGHT: 21g
- MATERIAL: Polycarbonate

$25.00
Change ventilation options with a twist!
Choose between aerodynamic performance or up to 11% more ventilation with a rotation of the Twistcap.
COMPATIBILITY
- Century MIPS
- Century
- ATTACHMENT: magnetic
- WEIGHT: 28g
- MATERIAL: Nylon

$24.00
This helmet mount works with all CatEye Lights. Pair it with the Volt 800 for the ultimate trail solution.

$21.00
Visor for Coyote helmet
COMPATIBILITY
- Coyote MIPS
- Coyote
- ATTACHMENT: Direct Mount
- WEIGHT: 45g
- MATERIAL: Nylon

$21.00
Visor for Impala helmet
COMPATIBILITY
- Impala MIPS
- Impala
- ATTACHMENT: Direct Mount
- WEIGHT: 45g
- MATERIAL: Nylon

$20.00
The Mountain/Urban Recreational Helmet Vent Light is one of the easiest and most powerful ways to increase visibility and safety on the road.

$19.00
A helmet-mounted taillight is an ideal way to help make sure you are seen in low light conditions.
The ATS LED Taillight only fits Lazer helmets equipped with the Advanced Turnfit System.
- COMPATIBILITY: Bullet 2.0, Century MIPS, Century, Wasp Air Tri, Victor, Impala MIPS, Impala, Urbanize MIPS
- BATTERY TYPE: LR41 button battery
- RUN TIME: 37 hours
- LUMENS: 4 lumens
- ATTACHMENT: ATS dial
- WEIGHT: 15g
- MATERIAL: Nylon

$19.00
A helmet mounted taillight is an ideal way to help make sure you are seen in low light conditions
LED light for Lazer TSPLUS retention system
COMPATIBILITY
- Tonic MIPS
- Tonic
- Tardiz2
- Coyote MIPS
- Coyote
- Chiru MIPS
- Next+
- Compact DLX MIPS
- Compact DLX
- Compact
- BATTERY TYPE: CR2032 button battery
- RUN TIME: 37 hours
- LUMENS: 4 lumens
- ATTACHMENT: TS+ mechanism
- WEIGHT: 12g
- MATERIAL: LED light
Page 1 of 2
Next page