Parts & Accessories
Wind-blocking protection and insulation fit over any cleat. Features: - Fits all cleat sizes - Wind-blocking construction - Reflective accents for visibility
Added insulation and wind protection on cooler days where additional warmth is needed. Features: - Windproof, water-resistant 3-Layer soft shell construction - Fleece lined for added warmth - Reinforced heel and toe - Fits any cleats - Reflective accents and logos improve low-light visibility
Coldfront Booties offer optimal insulation, wind protection and water resistance to keep your feet warm during cold weather rides. - Windproof, water-resistant 3-Layer soft shell construction - Fleece lined for added warmth - Reinforced heel and toe - Fits any cleats - Zippered Closure - Reflective accents and logos improve low-light visibility
Waterproof seam-sealed construction provides the needed protection to keep you warm, dry and comfortable on cold rainy rides. Features: - Waterproof soft-shell outer - Seam-sealed construction - Reinforced heel and toe - Fits any cleats - Zippered closure - Reflective accents and logos improve low-light visibility
Wear down the bottom of your shoes from too much cycling? The Toe and Heel Pad Set includes 4 pieces of rubber for a pair of your favorite Bont shoes along with screws to keep them in place.
Need to replace your buckle? Bont's Standard Buckle Kit includes a pair of buckles, loop, a pair of ladders and screws. Just grab a small screw driver and you can easily replace your current buckles. Please note that you can only replace the buckle on your shoe with the same buckle kit that the shoe came with. You cannot replace a Standard buckle with a Slimline buckle.
Thanks to the open construction under the foot, this bootie can be used with road or MTB shoes so you can cover all your cold-weather rides. The seams are glued and we even finished the top edge to help prevent water from coming into the bootie. Reflective details on the back help make this the do-it-all bootie. - 3mm-thick neoprene - Glued seams - Reflective heel panel - High-durability panel under foot - Adjustable Velcro closure under foot adapts to wide range of footwear - Heavy-duty rear zipper
DeFeet's Slipstream Shoe Covers fit snugly over your shoes to shield you from the cold and provide an aerodynamic advantage too. They also protect your shoes from weather and debris.
$40.00 $50.00 20% Off
Crafted from tough, waterproof neoprene, Endura's MT500 II Overshoes will keep your feet dry and warm. These booties feature waterproof rear zips and a welded center seam for a snug, smooth fit over your mountain bike shoes. The grooved rubber toe caps help on muddy slopes and steep climbs while the Kevlar soles withstand tough terrain. There are also reflective details for enhanced visibility. Say goodbye to muddy shoes!
Fend off darkness and soggy feet with Luminite II Overshoes. Crafted from seam-taped, waterproof fabric, these covers feature rugged Kevlar soles at the toe and durable flatlocked seams. They are suitable for all kinds of cycling footwear and cleats because they are fully open at the sole. The back heel features Velco fastenings for an adjustable fit. And, the Luminite II Overshoes are surrounded in 360-degree reflective trim for excellent visibility.
$56.00 - $70.00 $70.00 Up to 20% Off
Fend off numb feet this winter with Endura's Freezing Point Overshoes. The fleece lined neoprene construction keeps warmth in and protects your feet from the biting cold. Plus, these durable covers offer a snug fit, reflective detailing, and a rear zipper so they're easy to slip off post-ride.
$26.00 - $29.00
The Ergon TP1 Pedal Cleat Tool is the first tool for precisely and easily adjusting cycling shoes cleats. The ergonomically correct position of the feet on the pedals plays a crucial role in injury prevention and is also important for maximizing both performance and comfort.
For optimum power transfer to the bike, leg power needs to be effectively converted into propulsion. The IP3 insoles from Ergon support and stabilize the power transfer from the legs and feet straight to the pedals. Due to the patented stabilization delta, a natural foot position is achieved through three points resulting in an efficient and comfortable motion sequence while pedaling. Made in Germany and developed with insole specialist Solestar.
The fi'zi:k toe cover's light, comfortable, water resistant PU-cloth upper is mated to a hard-wearing, waterproof reinforced PU fabric sole. With its Microfiber toe cap and puller and this elastic binding it's comfortable, easy fitting and doesn't interfere with your cleats. A reflective fi'zi:k logo aids visibility and a range of sizes are available to suit all riders. Specifications - Windproof and Water Resistant upper (PU, Nylon & Polyester) - Reinforced PU fabric sole, Toe Cap & Puller - Thin elastic binding - Reflective fi'zi:k logo - Color: Black Sizes - X-Small/Small: Sizes 36-40 - Medium/Large: Sizes 41-44 - X-Large/XX-Large: Sizes 45-48
Replacement studs for Louis Garneau MTB and cyclocross shoes Contains - Four 8mm-tall studs - Stud-remover tool.
- 2 anti-slip platforms and 6 screws (4 x 17 mm) - Fit on all combined SPD and road outsoles - Convenient for stability and walking and are easy to clip on
The in-between solution to protect your feet on those chilly days. FABRICS: -I SO LITE: Provides warmth in cool weather - ANTISLIP 3 MM NEOPRENE : Isolates from cold, provides warmth and durability DETAILS: - Cleat opening under sole - Flatlock seams: Enhanced comfort - Reflective puller
- Replacement ratchet set for selected styles of Garneau's shoes - 2 pieces
Want one shoe piece to cover the entire road or mountain biking season? The Neo Protect 3 Shoe Cover is the one for you! Extremely durable, warm, and has easy adjustments with very wide side hook-and-loop fasteners with large locking zippers for easy use, this shoe cover is the only one you'll need all season long. It provides 360 degrees of reflectivity for added visibility in low light conditions, a reinforced Kevlar track under the foot with Hypalon rubber for long term walkability, and provides all-season wind and water resistance. - Cuff: Bias - Under Sole: 2 openings for road and SPD cleats - Side opening: Seam-sealed hook and loop fastener for easy slip-on - Visibility Features: Reflective - Fabric: 2 MM NEOPRENE – Isolates from cold, provides warmth
If you're looking for one shoe cover to provide the most warmth for the harshest of conditions, then look no further. The Thermal Pro is Louis Garneau's warmest shoe cover that provides 360 degrees of customizable protection from the worst winter can bring. A seam-sealed 2 mm neoprene outer with a fleece-lined inner provides unparalleled warmth, a customizable under sole prevents anything from seeping up into your foot, and easy wide openings with waterproof zipper and covered zipper garage keep the fouls of winter weather at bay. - Under Sole: Durable pre-cut rubber sole for better water resistance - Side opening: Seam-sealed Hook and loop fastener with safety puller for easy slip on/off - Shoe Cover Visibility Features: HiViz 360 - Fabric: 2 MM NEOPRENE – Isolates from cold, provides warmth
If the sun is shining, why not go for a ride despite the cold? The Wind Dry 2 is an excellent wind-breaker that will protect your feet from the cold so you can extend your riding season safely thanks to reflective accents on all sides. DETAILS: - Fabric: WIND DRY fabric blocks cold while providing breathability - Neoprene cuff: Better fit and prevents infiltrations - Under sole: 2 openings with textured neoprene and reinforced rubber for enhanced durability - HiViz360: Reflectors at rear, front, and sides for optimum visibility
The Transfo 3D Insole is quite simply the lightest insole on the market. Offering a simple and easy way of customizing the arch support that your foot receives, this is an innovative means of improving overall comfort on the bike and reducing the chance of long-term injury. Simply remove and replace the inserts based on how much arch support your foot requires. The non-slip surface of the underside of the insole locks it in place against the footbed of the shoe, while the Ergo Air ventilation system preserves airflow. The insole can be adapted to all types of cycling shoes, for both men and women. - Unisex - Arch support: Low/Med/High adapted arch profile ensures maximum foot contact for optimal support - Ergo Air: Provides through-and-through ventilation - Removable arch: Patent-pending anchoring system allows for an easy and customized adjustment - Under insole: The non-slip surface maintains insole in place
For those cool days when rain forces you to cover your shoes, the H2O 2 knows no equal. This shoe cover offers extreme protection from torrential downpours. The bottom of the shoe is almost entirely covered while the top repels water and also blocks wind. DETAILS: - Neoprene cuff: Better fit that prevents infiltrations - Under sole: 2 openings with textured neoprene and reinforced rubber for enhanced durability - Rear opening: Rear zipper with zipper protector for easy slip on/off - HiViz360: Reflectors at rear, front and sides for optimum visibility
Protect your feet from the elements with the Thermax II. This shoe cover provides high insulation from the cold and is very water resistant. The Thermax II offers maximum visibility thanks to reflective accents located at the front, rear and side. DETAILS: - Fabric: All seam-sealed 3 mm super stretch neoprene laminated with fleece - Under sole: Under opening with Velcro for easy adjustment and reinforced rubber for durability - Side opening: Side Velcro with safety puller for easy slip-on/off - HiViz360: Reflectors at rear, front and sides for optimum visibility
If you're looking for one shoe cover to provide the most warmth for the harshest of conditions, then look no further. Good news! Your search for the perfect foul weather shoe cover is over! Introducing the Garneau Thermal H2O Shoe Covers (some minor "assembly" required). This seam-sealed, 3mm super stretch neoprene, fleece-lined shoe cover is 100% wind and waterproof, and will keep your toes warm in the nastiest of weather! Its outsole is made out of rubber for additional traction, and can be cut to fit whatever type of cleat you have using the integrated cutting guide. We round it out with a seam-sealed zipper that tucks into a zipper garage and hits of reflectivity that offer additional visibility in low light conditions. Technical Details - Under Sole: Durable pre-cut rubber sole for better water resistance - Opening: Sean-sealed zipper for all weather conditions - Shoe Cover Fabric: super stretch neoprene laminated with fleece
- 1.5Mm stretchable neoprene - Pre-Cut cleat hole - S (36-38) - M (39-41) - L (42-44) - XL (45-47)
- 3Mm neoprene, With pre-cut cleat hole - Heavy duty, Reflective YKK zipper - S (36-38) - M (39-41) - L (42-44) - XL (45-47) - XXL (48+)
- 3Mm neoprene, Pre-Cut toe and heel openings - Heavy-duty, Reflective YKK zipper - S (37-39) - M (40-42) - L (43-45) - XL (46-48)
The Empire Laces were specially designed to be extremely durable, hold a single knot all day and provide unparalleled comfort. Giro now offers them in new colors to help customize your Empire shoes or replace older laces. *Shoes sold separately
If you’re riding the Alpineduro, you’re probably looking for big adventures in rugged conditions. With the Alpineduro Rain Gaiters, you can now keep the adventures going even in the wettest weather conditions. The Alpineduro Rain Gaiters have a waterproof four-way stretch upper with a lace hook and a YKK locking zipper. Reflective details help keep you visible at night, and the heavy-duty belly strap keeps the gaiter in place.
Page 1 of 2 Next page