Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Other
$5.00
Campagnolo small parts for bottom brackets.
$8.95
Screws required for mounting Campagnolo hydraulic rear calipers to bicycle frames. Lengths unique to frame specifications.
$8.95
- Compatible with Super Record, Record, and Athena EPS systems
- Required for use with the charger and works with V2 systems
- USA/North America plug - adapters required for other countries
$9.24
Campagnolo front derailleur parts for repairs.
$9.45
Screws required for mounting Campagnolo hydraulic rear calipers to bicycle frames. Lengths unique to frame specifications.
$9.95
Screws required for mounting Campagnolo hydraulic rear calipers to bicycle frames. Lengths unique to frame specifications.
$10.45
Screws required for mounting Campagnolo hydraulic rear calipers to bicycle frames. Lengths unique to frame specifications.
$10.95
Screws required for mounting Campagnolo hydraulic rear calipers to bicycle frames. Lengths unique to frame specifications.
$10.95
Screws required for mounting Campagnolo hydraulic rear calipers to bicycle frames. Lengths unique to frame specifications.
$11.95
EPS Power Unit Mounts are required for mounting the Power Unit to the bicycle and are available in both seatpost mount and waterbottle mount.
$11.95
EPS Power Unit Mounts are required for mounting the Power Unit to the bicycle and are available in both seatpost mount and waterbottle mount.
$14.70
Campagnolo Extra Parts
$15.23
Campagnolo front derailleur parts for repairs.
$22.45
Campagnolo EKAR disc brake adapters.
- Includes bolts
$23.10
Campagnolo Cassette Spacers
$23.95
Campagnolo EKAR disc brake adapters.
- Includes bolts
$24.89
Campagnolo Pulley Bolt Sets
$28.45
EPS Power Unit Mounts are required for mounting the Power Unit to the bicycle and are available in both seatpost mount and waterbottle mount.
$45.00
Alloy braze-on adaptor clamps are designed to work with all Campagnolo braze-on front derailleurs
$45.00
Alloy braze-on adaptor clamps are designed to work with all Campagnolo braze-on front derailleurs
$50.00
Campagnolo Adjusting Barrel with Nut Caliper Brake Part
$51.03
Campagnolo Pulley Assemblies
- Drivetrain Speeds: 10
- Does not fit 2004-2008 Record 10 speed (carbon pulley cage)
$57.86
Campagnolo Return Spring Caliper Brake Part
$60.00
Campagnolo Ultra Torque Cup and Bearing Kits. Includes 2 bearings and 2 seals.
- Kit includes 2 bearings and 2 seals
$70.00
EPS cable guide magnets are required for internally routing EPS wires.
- Includes: wire, metal cable, and magnet
$72.45
Campagnolo Cassette Lockrings.
- Fits 2000 and newer Campagnolo wheels
- Fits all Fulcrum wheels
- Fits 1999 Record/Chorus hubs and all Campy hubs 2000-newer
- 27.0mm thread OD
- For use only with Campagnolo 11-speed cassettes with 12 tooth first position cogs
$78.65
Campagnolo Rear Recessed Pivot Bolt Assembly Caliper Brake Part
$82.45
Desgined to increase the stiffness of the EPS front derailleur on frames with flexible braze-on mounts, especially frames with carbon fiber mounts.
- Required for use on carbon frames with carbon front derailluer braze on mounts
$115.71
Campagnolo Pulley Assemblies
$130.00
- Required for charging Campagnolo V2 and V3 Power Units
- Not compatible with Campagnolo V1 Power Unit
$1.00
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.
$2.99
Air Spring Volume Reduction Kit
- Cane Creel Kitsuma Air 1250^3 Negative Volume Reducer
$4.99
Replacement inserts for Thudbuster G4 suspension seatposts.
- Cane Creek ST G4 Elastomer Insert - X-Firm
$4.99
Replacement inserts for Thudbuster G4 suspension seatposts.
- Cane Creek ST G4 Elastomer Insert -Firm
$4.99
Replacement inserts for Thudbuster G4 suspension seatposts.
- Cane Creek ST G4 Elastomer Insert -Medium
$4.99
Replacement inserts for Thudbuster G4 suspension seatposts.
- Cane Creek ST G4 Elastomer Insert -Soft
$5.99
Compression ring fits above the upper bearing in a Cane Creek headset to ensure vertical and horizontal compression is optimal.
- Compatible with 41mm and 42mm OD upper bearings
$6.99
Replacement bushings for Cane Creek shocks.
$7.99
Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.
$7.99
Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.
$7.99
Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.
$8.99
Air Spring Volume Reduction Kit
- Cane Creek DBAir IL Volume Reduction Spacer Kit
$8.99
Thudbuster 3G Elastomer
$9.50 - $119.00
Our Seatpost Adapters quite literally fill the gap, and with over 25 sizes available, the combinations are endless. These Seatpost Adapters are compatible with static, suspension and dropper Seatposts.
$9.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
- Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Compatible with 41 and 42mm lower headset bearings
- Compatible with 30mm (1-1/8") straight steerer tubes
- Durable steel construction
$9.99
Travel reduction clips for Cane Creek suspension forks.
- Cane Creek Helm Air Travel Reduction Clips, Set of Two 10mm Clips
$9.99
Air Spring Volume Reduction Kit
- Cane Creek Rear Shock Volume Reducer - DB Kitsuma Air
$9.99
Allows the use of VALT springs with Fox coil shocks.
$10.50 - $11.00
- Color-matched aluminum Interlok Spacer for Cane Creek headsets
$10.99
40-Series Bearing
- Compatible with 110-, 40-, and 10-Series headsets
$10.99
Thudbuster G4 ST Elastomer Capsule - 70A from Cane Creek.
$11.99
110-Series Alloy Interlok Headset Spacer
- Aluminum construction
$11.99
40-Series Bearing
- Compatible with 110-, 40-, and 10-Series headsets
$11.99
Cane Creek ZN40-Bearing 41.8mm 45 x 45 Zinc, Each from Cane Creek.
$11.99
40-Series Bearing
- Compatible with 110-, 40-, and 10-Series headsets
$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
- Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Compatible with 41 and 42mm lower headset bearings
- Compatible with 30mm (1-1/8") straight steerer tubes
- Lightweight aluminum construction