Filter By:
- Bottom Brackets (231)
- Brakes/Levers/Pads (676)
- Cables (233)
- Cassettes/Freewheels (155)
- Chainrings (271)
- Chains (157)
- Cranksets (315)
- Derailleurs (156)
- Show More Categories
- Forks (174)
- Handlebar Grips/Tape (395)
- Handlebars (394)
- Headsets (190)
- Pedals (370)
- Saddles (382)
- Seatposts (131)
- Shift/Brake Combinations (70)
- Shifters (109)
- Shocks (39)
- Stems (190)
- Tires/Tubes (1299)
- Wheels (975)
- Other (1823)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
$79.99
3T's Arx II is a subtle refresh of the well-liked Arx alloy stem, which has found a place on every sort of bicycle since its launch in 2007. The faceplate is drawn in tighter at top and bottom for a more ovalized frontal appearance, while retaining the cutout 3T logo. The sides of the extension are slightly flattened for a more sculpted look by comparison with the tubular section of the first-generation Arx. A single M7 bolt clamps the stem to the fork steerer, instead of the twin M5 bolts previously used, and the Allen bolts used on the original Arx have been replaced by no-strip Torx bolts.
- Stack height: 40mm
- Weight: 135g (110mm)
$99.99 - $119.99
3T's ARX II Team stem is the perfect finishing touch. It's made of aluminum for light weight, durability, and excellent stiffness. Refined shaping of the clamping areas results in outstanding stress distribution on the bars and steerer for safety. Plus, it features 3T's secure aluminum 4-bolt faceplate.
- Aluminum stem with 40mm stack height
- Single M6 bolt clamps stem to fork steerer
- T25 bolts on bar clamp
- 120 grams for 110mm
- Bar Clamp Diameter: 31.8 mm
- S.H.I.S. Stem Clamp Diameter: 28.6mm
- Weight: 120 grams (110mm)
$160.00
Zero25 is a lightweight, universal seatpost with a twist: it’s two seatposts in one. The two clever, reversible saddle rail clamps transform the post from zero saddle setback to 25mm setback. All that’s needed is to flip the clamps from one side of the seatpost head to the other and the offset changes.
No more problems with getting the wrong seatpost or needing another one when you change the type of saddle you use – it now takes 30 seconds to transform your seatpost. And the best news is that despite the double functionality, the Zero25 is even lighter than our previous seatpost.
Zero25 can handle any type of seatpost rails, from round to all oval shaped carbon rails.
$174.99 - $175.00
3T's Ionic Team seatpost features the sophisticated and robust, 3T–exclusive DiffLock seat clamp. The splined alloy DiffLock coupling is a highly accurate method of setting saddle angle, needing only lightweight clamping by side-mounted bolts. It is especially useful for fine adjustment of saddle setback, which can be done without impacting saddle angle. The Ionic–0 Team has a carbon-fiber shaft bonded into an alloy head and is finished in high-gloss black.
Ionic–0mm offset places the seat clamp assembly in line with the seatpost for zero setback. Many athletes seeking outright speed favor this more forward position on the bike. Some frame designers are also specifying a slacker seat tube so riders can set their bike up with an inline post, which is lighter than a setback post.
Ionic–25mm offset places the seat clamp assembly 25mm behind the seatpost’s centerline. This gives athletes the option of a more rearward position on today’s shorter framesets.
- Carbon-fiber shaft with alloy head
- Weight: 205 grams
$324.99 - $335.00
3T's ARX LTD stem is the perfect finishing touch for your carbon superbike. It's made of carbon with titanium bolts for light weight and excellent stiffness. Refined shaping of the clamping areas results in outstanding stress distribution on the bars and steerer for safety. Plus, it features 3T's secure aluminum 4-bolt faceplate.
$9.99
- Prevents chain derailment when shifting to inner ring
- Adjustable hose-type clamp fits 1-1/8" to 1-3/8" seat tubes
$9.00
The 45NRTH stud insertion tool seats and removes the stud from the stud pocket. Customize your stud tread pattern or replace missing studs. Works with all 45NRTH studdable and studded products.
- Tire studs sold separately
- POM-injected handle
- Stainless steel barrel
- Thumb and index finger grips for more comfort and control
- Compatible with studs that have a 3.5mm or smaller shaft
$10.80 - $35.00
45NRTH utilizes a two-piece construction method to create a reliable and high-performing bicycle tire stud with a concave carbide-aluminum design. The open space and edges created by the large concave crown result in twice the surface area for increased traction and grip.
- Concave tip for traction, durability, and longevity
- Aluminum base to save weight
- Compatible with 45NRTH stud insertion tool
- Compatible with all studdable 45NRTH tires
- We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.
$14.00 - $100.00
45NRTH utilizes a two-piece construction method to create a reliable and high-performing bicycle tire stud, featuring a concave carbide-aluminum design. The super-sized concave crown creates open space and inside edges of the bowl, resulting in twice the surface area for increased traction and grip.
- Concave tip for durability and longevity
- Aluminum base to save weight
- Compatible with the 45NRTH stud insertion tool
- Compatible with all studdable 45NRTH tires
- Large stud offers more bite than regular concave stud and less rolling resistance than XL stud
- We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.
$18.00 - $135.00
45NRTH utilizes a two-piece construction method to create a reliable and high-performing bicycle tire stud, featuring a concave carbide-aluminum design. The super-sized concave crown creates open space and inside edges of the bowl, resulting in twice the surface area for increased traction and grip.
- Concave tip for durability and longevity
- Aluminum base to save weight
- Compatible with the 45NRTH stud insertion tool
- Sold in a pack of 100
- XL Stud features a larger carbide tip diameter for increased traction
$70.00
Latkat is a grip-focused winter road tire that gives riders control and confidence on cold, wet roads. Our Gripkraft rubber compound boosts wet-weather braking and cornering grip for predictable performance on pavement.
- 60 TPI tubeless-ready casing
- Siped and grooved tread for traction in wet winter conditions
- Gripkraft winter rubber compound for wet-grip performance and abrasion resistance
- Reflective sidewall stripe for visibility on low-light rides
- Bead-to-bead puncture protection for dependability
We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to premature casing wear.
Always check with rim manufacturer to verify rim and tire compatibility before assembly or use
$75.00
Commuting to work or school on black ice just got faster and easier with the Xerxes. 140 studs provide unrivaled control on those morning rides where ice patches threaten your commute. When a layer of snow conceals black ice, the ultra-narrow profile easily slices through the fluff and gets straight to business providing extreme traction in these extreme conditions. Run the Xerxes at minimum pressure for traction performance, and maximum pressure for a quieter and faster ride on clean roads.
- 140 Steel Carbide Studs
- Fast-rolling center tread
- Narrow profile to fit in most 700c frames
- We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.
$80.00 - $130.00
Versatile and confidence inspiring, the Gravdal securely navigates through harsh winter conditions with concave carbide studs for added traction in icy conditions.
- Siping creates a more conforming lug for added traction
- Concave carbide studs provide traction in the iciest conditions
- Reflective strip on sidewall makes you more visible when riding in low-light conditions
- Fits most bikes with cantilever or disc brakes
$95.00 - $145.00
From light winter trail riding to commuting, the Kahva allows you to carve your way through winter with concave carbide studs as well as single, double, and triple-siped lugs.
- Siping on center and side lugs lets the Kahva conform to terrain for increased grip in any riding conditions
- Concave carbide studs provide traction in the iciest conditions
- 252 carbide aluminum studs
- Directional lugs provide low rolling resistance while offering excellent braking traction
- We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.
$99.00
A wide flat pedal with wicked grip, 45NRTH's Heiruspecs deliver supreme contact with the bottom of your traditional winter boots. The big CNC-extruded body provides a massive footprint and 16 alloy pins spread across the concave body to provide the ultimate grip. Sealed DU bearings keep these pedals spinning smooth.
- Size: 110mm wide x 100mm long x 18mm high
- Spindle diameter: 9/16-inch
- Weight: 352 grams"
$110.00
Let Dunderbeist loose on your local groomed single track and feel the aggressive tread claw through the snow with unrivaled propulsion and braking traction. Its 4.6-inch footprint provides enhanced flotation and is compatible with a wide range of frames. Dual compound rubber rolls fast and keeps you in control while shredding the berms. Point uphill and feel the Dunderbeist dig in as you attack climbs covered in loose, unconsolidated snow. Pair Dunderbeist with its sibling front tire, Flowbeist, for the ultimate combination of traction and control.
- 4.6” footprint
- Designed for optimal use as a rear tire
- Aggressive side lugs comprised of soft rubber compound
- Ideally paired with Flowbeist front tire
$110.00
Flowbeist attacks groomed single track with confidence thanks to an ultra-aggressive tread that’s ready for whatever the trail throws at it. Designed for optimal use as a front tire, its wide 4.6” footprint floats well, rolls fast and is compatible with a wide range of frames and forks. Digging into berms brings the Flowbeist alive as its tall side lugs with softer compound rubber claw the snow. Hit the brakes on tight twisty single track and the aggressive tread design digs in to keep you and your bike in control. Pair Flowbeist with its sibling rear tire, Dunderbeist, for the ultimate combination of traction and control.
- 4.6” footprint
- Designed for optimal use as a front tire
- Aggressive side lugs comprised of soft rubber compound
- Ideally paired with Dunderbeist rear tire
$120.00 - $210.00
Do you ride in a wide range of winter conditions? Dillinger is one of the best winter fat bike tires for mixed conditions, thanks to its balance of speed and traction to help you stick to your line without slowing you down. And with optional studs, you’ll never slip, slide, or lose control on ice.
Details:
- Fast-rolling center tread for carrying speed
- Large, braced side lugs for predictable cornering performance
- Available with 168 Large Concave Carbide Aluminum Studs, 168 Carbide Steel Studs, or a custom-studdable tread for tuning your own stud pattern
- 60 TPI and 120 TPI casing options
- Tubeless-ready for supple ride quality, more grip, and weight savings
- We design 45NRTH tires for extreme winter cycling applications. We do not recommend using this product with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.
$120.00 - $230.00
The extra width of the Dillinger 5 provides flotation over loose snow additional grip while turning, accelerating or braking on ice and packed snow. Available in both studded and non-studded configurations. The studded version comes with 258 concave, aluminum carbide tip studs to provide extra bite and increased durability.
- Carbide studs grip ice
- Braced side lugs improve cornering
- Tubeless Ready
- We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.
$120.00
Vanhelga is a fat bike tire designed for trail riding in loose snow. It brings traction to a new level with dual-compound rubber, triple-siped shoulder knobs, and an open tread pattern that sheds snow. Vanhelga sheds snow and tracks flawlessly when the trail becomes soft and sloppy.
- 120 TPI tubeless-ready casing
- Ramped center lugs for rolling efficiency
- Aggressively siping for grip
- Shovel-design side lugs for predictable braking and cornering
- We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to premature casing wear and stud loss.
- Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use
$135.00
Dillinger 4 is a fast traction studded fat bike tire. The tightly spaced center tread rolls quickly, while taller, braced side lugs improve cornering in snowy conditions. Carefully positioned studs allow for railing icy, off-camber singletrack with confidence and control.
- Braced side lugs for improved cornering
- Directional center lugs for rolling speed and braking traction
- Replacement studs and stud insertion tool sold separately
- Custom studdable up to 252 studs
- We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.
- Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use
$165.00
Riding in deep, sticky snow just got a whole lot easier. 45NRTH's Helva pedals feature an open CNC-forged body that excels at shedding snow. Its super thin 9mm profile gives you maximum clearance while cornering and riding in deep ruts, plus they're light. Sealed DU bearings keep these pedals spinning smooth.
- Size: 110mm wide x 100mm long x 9mm high
- Spindle diameter: 9/16-inch
- Weight: 308 grams
$170.00 - $195.00
From loose snow to icy freeze-thaw and everything in between, Wrathchild craves the best and worst winter conditions. Deep center lugs aggressively claw into unconsolidated snow for extreme acceleration and braking traction. Super tall side lugs dig into loose snow to provide predictable and confident cornering. Encounter sheer ice on your ride and Wrathchild’s concave studs tear into the surface.
- Deep, aggressive lugs dig into snow
- Tall side lugs provide cornering confidence
- 252 concave studs tear into slick surfaces
- Tubeless ready
- We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss
$225.00
From loose snow to icy freeze-thaw and everything in between, Wrathchild craves the best and worst winter conditions.
- XL Concave Studs
- Deep lugs provide accelerating, braking, and cornering traction
- Open tread pattern sheds snow
- We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.
$250.00
Wrathlorde is an extreme-conditions fat bike tire designed for ultimate traction on challenging surfaces. Aggressive, tightly-spaced lugs decrease rolling resistance without compromising on traction, while 300 XL concave studs bite into ice for complete confidence.
- 120 TPI tubeless-ready casing
- Aggressive, tightly spaced center lugs with siping for a blend of rolling speed and traction
- Tall side lugs for traction in corners
- 300 XL Concave Studs for ultimate traction on ice
- Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use
$13.92 - $15.00
Super hardened steel designed for high torque Singlespeed and BMX use.
$22.64 - $25.16
- Durable cold forged CNC machined freewheel
- 3 pawl engagement for stronger hold with engagement every 12 degrees
- New removal notch pattern allows for better frame clearance
$54.02
- Forged and CNC-machined aluminum with precision sealed bearings for 2-pc cranks and 24mm spindles - BSA 1.37"x24T for 68/73mm shells
$6.42
- Aheadset preload adjusting bolt, cap and star nut
- Bolt is hollow for cable pass-through
$119.99
Inspired by the BMX bars of yesteryear
- 6061 T6 aluminum
- Shot peened and anodized black or silver
- The 22mm OD crossbar is not there just for strength, but allows installing accessories
$6.00
Use these to shim All-City's cross levers down from 31.8mm to 26.0mm.
- Adapts down to fit 26.0mm road, cross, or drop bars
- For use with All-City Cross Levers with 31.8mm bar clamp
- Sold as a pair
$12.00 - $15.00
- Chromoly steel
- CNC fabrication
- 1.29" x 24tpi left hand thread
$15.00
• Stainless chromoly steel with high-polish finish
• CNC fabrication
• 1.29" x 24tpi left hand thread
$20.00
This Service Kit from All-City Cycles includes a derailleur hanger, axle stud, and nut. The derailleur hanger is compatible with any frame out there, but you’ll need the included axle stud and nut for mounting to an All-City frame.
- Alloy construction
- Replacement derailleur hanger sold separately (Part Number DP0814)
- Axle Stud and Nut are compatible only with All-City Space Horse, Gorilla Monsoon, and Cosmic Stallion Titanium frames
$20.00
Hub End Caps for Go-Devil Hubs. Caps for quick release, 12mm, and 15mm available.
$20.00
• M4 threaded pedal cages mounting holes
• Four windows in pedal body large enough to fit double toe straps
• Polished Body
• Concave footbed
• Single-sided design
$25.00
Pretty up your ride and secure your seatpost with the All-City Shot Collar seat clamp.
- Laser-etched All-City logo
- Aluminum body with stainless steel hardware
$25.00
- Chromoly steel with black oxide finish
- 1.37" x 24tpi right hand thread
- Requires a cog lockring (sold separately)
- Compatible with 1/8-inch chains
$30.00
Rear Thru Axle conversion kit for Go-Devil Hubs
- Converts QR to 142x12mm thru (axle not included)
$34.00
• Stainless steel with high-polish finish
• 1.37" x 24tpi right-hand thread
• Requires a lockring (sold separately)
• Compatible with 1/8-inch chains
$40.00
These inline cross brake levers have super-smooth Delrin bushings, a hinged clamp, drilled-out lever bodies for lighter weight and grip, and angled cable routing to make setup and operation a breeze. They’re designed for 31.8mm handlebars, but with All-City Cross Lever shims (sold separately) they’ll work perfectly with 26.0 as well.
- For use as in-line, secondary brake levers in addition to standard road brake levers
- Hinged clamp fits 31.8 bars; shims for 26.0 sold separately (BR8121)
- Cantilever and caliper brake compatible
$45.00
Designed specifically for All-City’s Cosmic Stallion Titanium Frameset, this Cable Port Service Kit helps guide internally routed housing through the frame. Compatible with a wide range of brake, drivetrain, and dropper post options, all the screws and plates required to configure your setup are included.
- Aluminum hatch cover with stainless screws
- All necessary screws and plates included
$66.00
• Aluminum hub body with hollow steel axle
• Fixed/Free
• Sealed bearings
• 120mm or 130mm rear spacing
• 32 hole
• 282 grams
$75.00
- 11 Speed Freehub Body for Shimano and Sram Cassettes
- XD Driver for SRAM Cassettes
- 11 Speed Freehub has 28 points of engagement
- XD Driver has 56 points of engagement
- Fits Go-Devil Hubs
$85.00
Hubs typically seem to fall into two general categories: light and very expensive or heavy and cheap. With this typical bike industry paradigm, we saw an opportunity. You see, for years we've been using high-end geared hubs from the manufacturer of our track offerings on our personal bikes. They are very lightweight (peep the specs) and just plain work. We decided to finally make those hubs available to you and corner the market in our own category: lightweight, affordable, and incredibly practical.
We've ridden them on all kinds of bikes from mtb to road and we're in love. They are reliable, dang light and very reasonably priced.
We offer the Go-Devil in a minimal amount of configurations and ship them with all the necessary endcaps and a quick release skewer, future proofing them in case you want to use them on various bikes over the years. Quick Release, 12mm, and 15mm endcaps are included.
On all models we spec high-quality made in Japan stainless-steel sealed bearings.
Oh, and we've got polished options as well. Kind of a big deal because polished hubs have become a rarity in our modern world.
- Weight: Disc Brake: 164g
- Includes 12mm, 15mm endcaps and quick release skewer
- Non-Drive Side Center To Flange Disc Brake: 21mm
- Drive Side Center To Flange Disc Brake: 36mm
- Non-Drive Flange Diameter Disc Brake: 58mm
- Drive Side Flange Diameter Disc Brake: 45mm
$85.00
New Sheriff hubs are the ultimate in track racing hubs. They minimize weight with larger cutouts in the flanges, lightened axles, shorter bolts, and slimmer end caps than previous versions. The result is a hubset that weighs a mere 432g, 198g for the front, and 234g for the rear. This makes it one of the lightest track hubsets in the world, a figure even more impressive when you consider that All-City didn't eliminate the usefulness of a fixed / fixed or fixed / free option as most racing hubs do.
They feature the finest Japanese manufactured 6902 bearings which roll incredibly fast and smooth while retaining excellent seals for all weather, all-day everyday durability.
Front hub specs:
- Weight: 198g
- Torque Spec: 33nm (25ft lbs.)
- Non-Drive Side Center to Flange: 34mm
- Drive Side Center to Flange: 34mm
- Non-Drive Side Flange Diameter: 62mm
- Drive Side Flange Diameter: 62mm
Rear hub specs:
- Weight: 234g
- Torque Spec: 33nm (25ft.lbs.)
- Non-Drive Side Center to Flange: 29mm
- Drive Side Center to Flange: 29mm
- Non-Drive Side Flange Diameter: 62mm
- Drive Side Flange Diameter: 62mm
$130.00
Hubs typically seem to fall into two general categories: light and very expensive or heavy and cheap. With this typical bike industry paradigm, we saw an opportunity. You see, for years we've been using high-end geared hubs from the manufacturer of our track offerings on our personal bikes. They are very lightweight (peep the specs) and just plain work. We decided to finally make those hubs available to you and corner the market in our own category: lightweight, affordable, and incredibly practical.
We've ridden them on all kinds of bikes from the Electric Queen to the Mr. Pink and we're in love. They are reliable, dang light and very reasonably priced.
We offer the Go-Devil in a minimal amount of configurations and ship them with all the necessary endcaps and a quick release skewer, future proofing them in case you want to use them on various bikes over the years. Quick Release lever and 12mm thru-axle endcaps are included.
On all models we spec high-quality made in Japan stainless-steel sealed bearings.
The splined freehubs have 28 points of engagement, the XD driver has 56.
Oh, and we've got polished options as well. Kind of a big deal because polished hubs have become a rarity.
- Weight: 277g
- Includes 12mm thru-axle end caps and quick release skewer
- Drive Side Center To Flange 18.5mm
- Non-Drive Center to Flange 34mm
- Non-Drive Flange Diameter 58mm
- Drive Side Flange Diameter 49mm
$1.00
- Brass barrel, 2.2mm cable pass-through, screwdriver slot on both ends
$3.36
- Thermally bonded PTFE coated slick galvanized cable for minimal friction
- Premium stainless-slick low-friction, rust-resistant cable
- Economy galvanized standard replacement cable
- AX-2654 and AX-2657 are double ended, with both Road and MTB anchors
- 1700mm length
$3.50
- Plastic guide with ziptie for securing housing/Tubing nearly anywhere on the bike
$5.12
- Thermally bonded PTFE coated slick galvanized cable for minimal friction
- Premium stainless-slick low-friction, rust-resistant cable
- Economy galvanized standard replacement cable
- 2000mm length
$5.54
- Thermally bonded PTFE coated slick galvanized cable for minimal friction
- Premium stainless-slick low-friction, rust-resistant cable
- 1700mm length
$5.76
- Basic housing and galvanized inner cable with header card
- Brake kit includes black casing and a 1.6mm cable
- Derailleur kit includes black casing and a 1.2mm cable
- Cables have dual ends with leads to fit any brake or shifter
Page 1 of 145
Next page