Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Mountain

Can you hear that? It's the trail calling your name. Get on a mountain bike from Echelon Cycles and answer that call today. We've got an awesome selection of mountain bikes from Scott, Jamis, Fuji, and more to get you shredding rocks, roots, dirt, and anything else in between. Not sure which mountain bike is right for you? Let us know, and we'll help you choose.

$14,999.99
The Spark RC SL is the perfect blend of top-notch carbon engineering, never before seen levels of integration, and just the right amount of secret sauce. We wanted to make this platform faster than ever before both up and down the hill. Increasing travel, perfecting geometry, and applying input from the world's best athletes, we've created the cross-country race bike of all cross-country race bikes. If you think fast is fun, then you're going to love this ride. KEY FEATURES - Spark RC Carbon HMX SL 1870g Frame - FOX 34 SC Float Factory 120mm Fork - FOX Nude 5 Factory EVOL, 120mm, TL - SRAM XX1 Eagle AXS, PWR Meter - Shimano XTR Disc Brakes - Maxxis Rekon Race Foldable Tires TECHNOLOGIES: EVO-LAP TECHNOLOGY But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we've optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without sacrificing the stiffness, comfort or impact resistance. The entire range benefitted from our Evo-Lap technology. ADJUSTABLE HEAD ANGLE With the new Spark, you can adjust the head angle by .6 degrees slacker or steeper. This can be done without cutting cables or bleeding brakes. All you must do is disassemble the bar, rotate the headset cups 180 degrees, and reassemble. EASY SHOCK ACCESS Accessing the shock via the bottom bracket area is facilitated through a hatch. This makes it easy to adjust rebound, compression, shock pressure, and for installing or replacing the cable for our TwinLoc Suspension System. PATENTED INTEGRATED SUSPENSION SYSTEM An integrated shock platform allows us to refine suspension characteristics without sacrificing weight. Often, when working with bikes at this level, the concept of marginal gains becomes an ever important one. For the optimal performance of a suspension shock, power transfer must be the most direct possible. What we want to avoid are any inefficient directional movements, in other words, lateral movements (sideways to the direction of travel) as the shock goes through its compression. Having an integrated shock allows us to improve this in several ways. Firstly, the frame construction around the shock and with the trunnion mount can be designed to be much more rigid, reducing movement and fostering more efficient power transfer. We can also add much larger bearings to the seat tube pivot, further reinforcing this area and reducing any unnecessary motion. Our integrated Suspension technology also helps us to engineer frames with a lower shock placement which lowers center of gravity. As a result, the bike benefits from better handling, and a more stable, confidence-inspiring ride for the end user. While these may seem like minor improvements individually, the sum of their parts results in more efficient shock performance. Additionally, the shock is fully protected from any foreign elements. Rainy race? No problem, your shock will continue to perform at its best regardless. REAR AXLE TOOL Our rear axle tool has been a staple on our bikes for years, it is now better than ever. It features a T25, T30, and a 6 Allen key all in one. With these three options, you can adjust all pivot hardware and nearly everything else there is to adjust on the bicycle. SINGLE PIVOT SUSPENSION LAYOUT A full-suspension bike will never have success without, well, good suspension design. From the first time we rode the Spark's single pivot layout we fell in love. Years later, we still believe that for technical cross-country racing and fast, punchy singletrack it is the best approach. The Spark's suspension layout has a very specific and proven kinematic and less unsprung mass. Using a flex pivot in the seat stay is an ideal solution for bikes in this travel range. This allows us to keep a very lightweight system while still ensuring optimal suspension performance. Please note that bike specifications are subject to change without prior notice.
$13,999.99
KEY FEATURES: - Scale Carbon HMX SL Frame - FOX 32SC Float Factory 100mm Fork - RideLoc 2 / 3-Position Remote - SRAM XX1 Eagle AXS, PWR Meter - Trickstuff Piccola Disc Brakes - Maxxis Rekon Race Foldable Tires The ALL-NEW Scale RC SL is the perfect blend of stiffness, lightweight, and 30 years of carbon expertise. These characteristics, encompassed in an uncompromising frame design decisively accelerate the Scale away from the pack with every pedal stroke. Whenever you find yourself up against the clock, tip the scales in your favor. TECHNOLOGIES: ADJUSTABLE HEAD ANGLE With the new Scale RC, you can adjust the head angle by 0.6 degrees slacker or steeper. This can be done without cutting cables or bleeding brakes. All you must do is disassemble the bar, rotate the headset cups 180 degrees, and reassemble. SYNCROS FRASER IC COMBO The New Scale features the Fraser iC combo from Syncros. Integrating the cables presents a number of unique problems and the Fraser was designed in part to address this. Syncros’s designers worked on the shape to allow the cables to flow under the bar and around the sides of the stem before disappearing into the headset with integrated plastic parts to keep it clean and efficient. This avoids bends or kinks in the cables and provides a minimalist front end. All our bars and stems feature multiple options for computer, light, and camera mounts both on top or under the bar. DESIGN The new Scale’s design was uncompromisingly subjected to our pursuit of perfection and drive for pure efficiency, strictly following the guiding principle of "Form follows Function". In our search for the ultimate, yet most simple construction, we’ve centered the design around the essentials by balancing the bike’s DNA in order to create a whole new breed of XC bike. The result is a straightforward and clear design, which provides the all-new Scale with its distinctive character and aggressive look: a bike that proudly shows off its characteristics. HOLLOW DROPOUT CONSTRUCTION The dropout features an advanced, hollow construction, which allows the axle head to clamp against the inner surface of the dropout and leaves the head flush with the surface. This enables the lightest possible construction approach and a clean-looking design from the outside. While being able to directly shave off 7.5g with the new dropout construction, the optimized design favors a narrower construction of the rear triangle area, which in turn enables a reduction of 20g in this area of the frame (HMX-SL). POLYMER INSERTS With the all-new Scale RC, we constantly reduced the amount of metal inserts wherever possible. Instead, lighter polymer versions were incorporated and can be found as the bottle cage inserts on the HMX-SL frames. These can be plugged completely, sitting flush on the frame due to a smart and flexible clipping mechanism. Being able to set up the plugs and mounts needed provides riders with maximum flexibility and further eliminates potential vulnerable points as these are easily replaceable in the event of a damaged thread. Plugs and inserts are easy to set up without the need for additional tools and further contribute to the overall clean design. MONOCOQUE CONSTRUCTION The new Scale RC’s monocoque construction enables production using only one mold for the main section of the bike, the front triangle. Applying our carbon expertise, the new Scale, therefore, consists of only 3 separate pieces molded together. This directly translates into an increased level of efficiency due to the reduced number of junctions required therefore decreasing weight while keeping superior stiffness – something we’re always aiming for with hardtail race bikes. With the full frame constructed as a system, the monocoque design enables the frame to handle forces as a whole. SERVICE DOOR A little service door, which is accessible through a downtube cover, allows easy access to the interior of the frame without the need to remove the Bottom Bracket. Frame maintenance is made easy with regards to cable routing.
$13,999.99
When you think of the perfect mountain bike, what comes to mind? For us, it's the Spark 900 Ultimate. Why you ask? Well, beyond the fact that it is fast, lightweight and ultra capable on all sorts of terrain, it's just damned good lookin'. Short-travel trail bike? "Downcountry" rig? Occasional race bike? Whatever, call it what you want to call it. All we know is that this is one hell of a mountain bike. KEY FEATURES: - Spark Carbon HMX Frame - FOX 34 Float Factory 130mm Fork - FOX Nude 5T EVOL, TwinLoc, 120mm - SRAM XX1 Eagle AXS 12 Speed - Shimano XTR 4 Piston Disc Brakes - Schwalbe Wicked Will Tires TECHNOLOGIES: EVO-LAP TECHNOLOGY With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we've optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without sacrificing the stiffness, comfort or impact resistance. The entire range benefitted from our Evo-Lap technology. ADJUSTABLE HEAD ANGLE With the new Spark, you can adjust the head angle by .6 degrees slacker or steeper. This can be done without cutting cables or bleeding brakes. All you must do is disassemble the bar, rotate the headset cups 180 degrees, and reassemble. EASY SHOCK ACCESS Accessing the shock via the bottom bracket area is facilitated through a hatch. This makes it easy to adjust rebound, compression, shock pressure, and for installing or replacing the cable for our TwinLoc Suspension System. PATENTED INTEGRATED SUSPENSION SYSTEM An integrated shock platform allows us to refine suspension characteristics without sacrificing weight. Often, when working with bikes at this level, the concept of marginal gains becomes an ever important one. For the optimal performance of a suspension shock, power transfer must be the most direct possible. What we want to avoid are any inefficient directional movements, in other words, lateral movements (sideways to the direction of travel) as the shock goes through its compression. Having an integrated shock allows us to improve this in several ways. Firstly, the frame construction around the shock and with the trunnion mount can be designed to be much more rigid, reducing movement and fostering more efficient power transfer. We can also add much larger bearings to the seat tube pivot, further reinforcing this area and reducing any unnecessary motion. Our integrated Suspension technology also helps us to engineer frames with a lower shock placement which lowers center of gravity. As a result, the bike benefits from better handling, and a more stable, confidence-inspiring ride for the end user. While these may seem like minor improvements individually, the sum of their parts results in more efficient shock performance. Additionally, the shock is fully protected from any foreign elements. Rainy race? No problem, your shock will continue to perform at its best regardless. REAR AXLE TOOL Our rear axle tool has been a staple on our bikes for years, it is now better than ever. It features a T25, T30, and a 6 Allen key all in one. With these three options, you can adjust all pivot hardware and nearly everything else there is to adjust on the bicycle. SINGLE PIVOT SUSPENSION LAYOUT A full-suspension bike will never have success without, well, good suspension design. From the first time we rode the Spark's single pivot layout we fell in love. Years later, we still believe that for technical cross-country racing and fast, punchy singletrack it is the best approach. The Spark's suspension layout has a very specific and proven kinematic and less unsprung mass. Using a flex pivot in the seat stay is an ideal solution for bikes in this travel range. This allows us to keep a very lightweight system while still ensuring optimal suspension performance. Please note that bike specifications are subject to change without prior notice
$12,000.00
The New Cutting Edge This is the ultimate XC race bike. Ground-breaking suspension, aggressive geometry, and feathery weight let you go full gas from the gun. Where it thrives Between the tape What it's built for Speed, Efficiency, and Endurance Highlights: - Ultralight Hi-MOD carbon FlexPivot frame / Lefty Ocho Carbon fork / Integrated Cannondale App connectivity - SRAM XX1 Eagle AXS wireless 12-speed group / Level Ultimate disc brakes - HollowGram 27 carbon tubeless-ready wheels / Stash onboard repair kit Technology: Suspension for speed - The most advanced suspension ever made for XC. While others sacrifice performance to save weight, our patented FlexPivot suspension delivers both. Incredibly light, with unreal grip, acceleration, and control, it lets you go flat-out everywhere. More speed. More fun. Degrees of difference - Scalpel’s progressive geometry has evolved even further – we have a full degree and a half slacker headtube angle, a one-degree steeper seat tube angle – creating an XC bike that’s more aggressive, lightning-fast, fun, and stable everywhere, from the World Cup to your local loop. Stiff. Light. Fast. - At just over 1900 grams, complete with shock, the new Scalpel frame is one of the lightest full-suspension MTB frames on the market. Incredible suspension, impeccable handling, and feathery weight – it’s a recipe for victory. The World's Best XC Fork - Lefty Ocho is simply the most advanced, smoothest, most precise-handling ultralight fork ever made. Its one-of-a-kind design lets you float through the chop and slice through the chunder like nothing else.
$11,999.99
KEY FEATURES: - Genius Carbon HMX Frame - FOX 36 Float Factory 160mm Fork - FOX Nude 5T EVOL, TwinLoc, 150mm - SRAM XX1 Eagle AXS 12 Speed - Shimano XTR 4 Piston Disc Brakes - Maxxis Foldable Tires The Genius has always been our favorite bike. Smart suspension, smarter features, and the smartest design lead to an unbelievable trail bike that just can't get enough. The All-New Genius, any trail, any time. Please note that bike specifications are subject to change without prior notice. TECHNOLOGIES: PATENTED INTEGRATED SUSPENSION TECHNOLOGY The new Genius applies our patented Integrated Suspension Technology. Not only does this make for a fantastic looking bike, but it also allows us to improve the bike's suspension performance. Primarily, we can engineer frames with a lower center of gravity, resulting in better handling, and a more stable, confidence inspiring ride for the end user. Additionally, the frame’s construction is stiffer around the BB, which reduces unnecessary movements laterally to the direction of the shock’s travel. It goes without saying that the shock is also protected from debris and the elements, two of the main enemies when it comes to shock performance. EXTERNAL SAG INDICATOR Setting sag and checking travel use is easier than ever before with the new Genius. An external indicator on the link allows the end user to easily set sag and identify how much travel they’re using. INTEGRATED HEADSET CABLE ROUTING The Genius features a Hixon Cockpit from Syncros, which has undergone a redesign. Integrating the cables presents a number of unique problems and the Hixon was designed in part to address this. Syncros’s designers worked on the shape to allow the cables to flow under the bar and around the sides of the stem before disappearing into the headset with integrated plastic parts to keep it clean and efficient. This avoids bends or kinks in the cables and provides a minimalist front end. All our bars and stems feature multiple options for computer, light, and camera mounts both on top or under the bar. EASY SHOCK ACCESS With the all-new Genius, accessing our patented integrated shock is easier than ever. Just push the button, pop off the cover, and access is yours. From here, adjusting rebound, air pressure, etc. is a mere button push away. When you're done, just pop the cover back on until you hear a "click" and off you go. NUDE SUSPENSION TECHNOLOGY Shocks with NUDE Technology have been integral to SCOTT Full suspension bikes for nearly two decades. Working closely with our suspension partners, we continue to improve upon this technology so that whether you're racing World Cups at the highest level or out for a big day in the mountains, you'll always have the best support on offer. TWINLOC SUSPENSION SYSTEM With TwinLoc, a rider can effectively control the complete frame, fork, and shock as a system. Why does this matter? A bike with 150mm of suspension travel, correctly set up, has more sag than a bike with 130mm. It's that extra travel that makes it more fun to ride and more capable on the descents, but the greater sag has an oversized effect on the bike's geometry and climbing performance. That's where TwinLoc matters. TwinLoc helps manage the sag effect in several ways. Whereas most systems only increase low-speed compression in an effort to gain pedaling efficiency, TwinLoc allows us to not only change compression damping, but also to change the spring curve, dynamically altering the geometry of the bike. In Trail mode, the shock is not only firmer, but it has dynamically less travel. The bike sits higher, maintains a steep seat angle for those climbs, and becomes more agile. We also offer a third, full lockout mode for going up in the most efficient manner possible. These unique settings optimize climbing geometry, even on longer travel bikes. We can eliminate the "long travel effect" that can rob your pedaling efficiency, but we're not robbing you of the full-fun, 150mm travel when you point it downhill. From a race setting to a lunch ride to an after-work trail shred, being able to switch from mode to mode depending on a trail's profile at the push of a lever is paramount to riding faster and having a damned good time.
$11,000.00
The Purest Form of Racing. A whole new breed of XC Hardtail, purpose built to hurt 'em on the ups, drop 'em on the downs, and propel you straight to the top step. Where it thrives Between the tape What it's built for Speed, Efficiency, and Endurance Highlights: - Progressive, ultralight Hi-MOD Carbon frame / Lefty Ocho Carbon 110mm fork / Integrated Cannondale App connectivity - SRAM XX1 Eagle AXS wireless 12-speed group / Level Ultimate disc brakes - HollowGram 25 carbon tubeless-ready wheels / Cannondale C1 Carbon bar and post Technology: Confidence on edge - No hesitant, fistful-of-brakes descending here. The ultra slack, 66.5° front end gives you the stability and control you need to really open it up on the downhills. Brake later. Corner harder. Pass on the descents. Stay centered - Scalpel HT's Proportional Response size-specific chainstays and steep seat angle keep you balanced between the wheels for better traction and power on the ups, and more confident control on the downs. Lead with Lefty - 110mm of the smoothest, most precise-handling ultralight front suspension out there. Extra-long fork offset brings extra agility to the super stable front end. Better control, more speed. Drop the chatter - Sculpted flex zones in the chainstays partner with dropped seatstays to eat up the chatter from rowdy terrain, boosting control, smoothing the ride, and minimizing fatigue. Go harder. Go faster. Go farther.
$10,999.99
KEY FEATURES: - Genius Carbon HMX Frame - FOX 36 Float Factory Grip 2 160mm - FOX FLOAT X Nude, TracLoc, 150mm - SRAM X01 Eagle AXS 12 Speed - Shimano XTR 4 Piston Disc Brakes - Maxxis Foldable Tires Made to go up the mountain in a hurry, and down the mountain even faster. The all-new Genius ST features a custom Float X Nude shock from FOX and is the perfect bike for those who have an insatiable hunger for rippin' trail. TECHNOLOGIES: PATENTED INTEGRATED SUSPENSION TECHNOLOGY The new Genius applies our patented Integrated Suspension Technology. Not only does this make for a fantastic looking bike, but it also allows us to improve the bike's suspension performance. Primarily, we can engineer frames with a lower center of gravity, resulting in better handling, and a more stable, confidence inspiring ride for the end user. Additionally, the frame’s construction is stiffer around the BB, which reduces unnecessary movements laterally to the direction of the shock’s travel. It goes without saying that the shock is also protected from debris and the elements, two of the main enemies when it comes to shock performance. EXTERNAL SAG INDICATOR Setting sag and checking travel use is easier than ever before with the new Genius. An external indicator on the link allows the end user to easily set sag and identify how much travel they’re using. INTEGRATED HEADSET CABLE ROUTING The Genius features a Hixon Cockpit from Syncros, which has undergone a redesign. Integrating the cables presents a number of unique problems and the Hixon was designed in part to address this. Syncros’s designers worked on the shape to allow the cables to flow under the bar and around the sides of the stem before disappearing into the headset with integrated plastic parts to keep it clean and efficient. This avoids bends or kinks in the cables and provides a minimalist front end. All our bars and stems feature multiple options for computer, light, and camera mounts both on top or under the bar. EASY SHOCK ACCESS With the all-new Genius, accessing our patented integrated shock is easier than ever. Just push the button, pop off the cover, and access is yours. From here, adjusting rebound, air pressure, etc. is a mere button push away. When you're done, just pop the cover back on until you hear a "click" and off you go. SUPER TRAIL FAMILY SCOTT's Super Trail line is a new, progressive specification of Mountain Bikes and E-MTB's featuring suspension components that favor more adjustability. Bikes in the ST range are tailored more toward the downhill part of the ride. NUDE SUSPENSION TECHNOLOGY Shocks with NUDE Technology have been integral to SCOTT Full suspension bikes for nearly two decades. Working closely with our suspension partners, we continue to improve upon this technology so that whether you're racing World Cups at the highest level or out for a big day in the mountains, you'll always have the best support on offer.
$10,999.99
The Spark RC World Cup EVO is the perfect blend of top-notch carbon engineering, never before seen levels of integration, and just the right amount of secret sauce. We wanted to make this platform faster than ever before both up and down the hill. Increasing travel, perfecting geometry, and applying input from the world's best athletes, we've created the cross-country race bike of all cross-country race bikes. If you think fast is fun, then you're going to love this ride. KEY FEATURES - Spark RC Carbon HMX Frame - RockShox SID Ult. RD3 120mm Fork - RS Nude 5 RLC3, 120mm, TwinLoc - SRAM XX1 Eagle AXS 12 Speed - Shimano XTR Disc Brakes - Maxxis Rekon Race Foldable Tires TECHNOLOGIES: EVO-LAP TECHNOLOGY With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without sacrificing the stiffness, comfort or impact resistance. The entire range benefitted from our Evo-Lap technology. ADJUSTABLE HEAD ANGLE With the new Spark, you can adjust the head angle by .6 degrees slacker or steeper. This can be done without cutting cables or bleeding brakes. All you must do is disassemble the bar, rotate the headset cups 180 degrees, and reassemble. EASY SHOCK ACCESS Accessing the shock via the bottom bracket area is facilitated through a hatch. This makes it easy to adjust rebound, compression, shock pressure, and for installing or replacing the cable for our TwinLoc Suspension System. PATENTED INTEGRATED SUSPENSION SYSTEM An integrated shock platform allows us to refine suspension characteristics without sacrificing weight. Often, when working with bikes at this level, the concept of marginal gains becomes an ever important one. For the optimal performance of a suspension shock, power transfer must be the most direct possible. What we want to avoid are any inefficient directional movements, in other words, lateral movements (sideways to the direction of travel) as the shock goes through its compression. Having an integrated shock allows us to improve this in several ways. Firstly, the frame construction around the shock and with the trunnion mount can be designed to be much more rigid, reducing movement and fostering more efficient power transfer. We can also add much larger bearings to the seat tube pivot, further reinforcing this area and reducing any unnecessary motion. Our integrated Suspension technology also helps us to engineer frames with a lower shock placement which lowers center of gravity. As a result, the bike benefits from better handling, and a more stable, confidence-inspiring ride for the end user. While these may seem like minor improvements individually, the sum of their parts results in more efficient shock performance. Additionally, the shock is fully protected from any foreign elements. Rainy race? No problem, your shock will continue to perform at its best regardless. REAR AXLE TOOL Our rear axle tool has been a staple on our bikes for years, it is now better than ever. It features a T25, T30, and a 6 allen key all in one. With these three options, you can adjust all pivot hardware and nearly everything else there is to adjust on the bicycle. SINGLE PIVOT SUSPENSION LAYOUT A full-suspension bike will never have success without, well, good suspension design. From the first time we rode the Spark’s single pivot layout we fell in love. Years later, we still believe that for technical cross-country racing and fast, punchy singletrack it is the best approach. The Spark’s suspension layout has a very specific and proven kinematic and less unsprung mass. Using a flex pivot in the seat stay is an ideal solution for bikes in this travel range. This allows us to keep a very lightweight system while still ensuring optimal suspension performance. Please note that bike specifications are subject to change without prior notice.
$9,999.99
KEY FEATURES: - Gambler HMX Carbon Frame - FOX 40 Factory Float 203mm Fork - FOX Float X2 Factory 200mm Shock - SRAM X01 DH 7 Speed - Shimano XT M8120 4 Piston Disc Brakes - Maxxis Assegai 2.5" DH Tires The Gambler Tuned is a downhill mountain bike that was designed for one thing and one thing only, pure, unadulterated speed. We made it to get you to take lines you'd never thought imaginable, to make you want to go to the bathroom before your race run—twice. We made it so that when you drop out of the start gate, the only aspect holding you back will be, well, you. Taking years of racing development and mixing it with our carbon expertise, this bike is our answer to the needs of white-knuckle downhill racing. The Gambler, Simply Fast. TECHNOLOGIES: GAMBLER ADJUSTABILITY Our downhill bikes have always pushed the boundaries of adjustability. Both a rider and a bike need to be able to adapt to tracks, weather conditions, and choice of shock (air or coil.) The new Gambler allows you to switch between wheel sizes without changing any other components on the bike. Chain stay length can also be adjusted, independent of wheel size choice. Short with 29", sure thing. Long with 27.5" Yep, that too. The Gambler also comes with spare angled headset cups, so that you can adjust head angle relative to wheel size, fork choice, etc. We also have a 4-way chip to allow not only bottom bracket height adjustment relative to wheel size, but more importantly for geometry/kinematic tweaks depending on tracks, shocks or rider preference. We want the bike to be optimizable for each shock and rider given the track. All this adjustment allows us to focus on balance. And by balance, we mean the perfect combinations to find traction. Geometry and shock curve options help get a rider's center of mass in the perfect spot between the wheels for optimum levels of balance and traction. However, as race tracks change, this balance point changes, and not all bikes can change with it – we wanted to be able to do so. For instance, a bike with geometry for a steep track will roll slowly and push wide in turns on a flatter track, whereas a bike set up for flatter tracks will make it difficult for a rider to keep their center of gravity far enough back for steep tracks. GAMBLER INTEGRATED BASHGUARD AND CHAIN DEVICE It seems like it shouldn't make a huge difference on the bike, but it turns out it does. We even joke saying that it dictated the design of the entire bike. Why make this a proprietary piece? Chain devices are normally made to work with many different bikes and are therefore compromised. We only need to make it work for this one frame and a specific range of chainring sizes, so it can be easier to set up, better performing, lighter, and allows us to gain some advantages on the frame construction, further reducing weight and increasing reliability/durability. Historically, designing around a chain guide/bash guard was akin to designing around a front mech – not ideal. They require a heavy, molded alloy mount in the frame that can bend under impact, and leaves threads in the frame that can be damaged. These would restrict the frame's main pivot width and chain stay shape. In addition, the chain guide and bash guard were connected by a backplate, further increasing weight. With our design, we no longer have an in-molded alloy mount, nor do we have threads in the frame. More importantly, we're able to design a wider main pivot, making for a stiffer connection and better bearing life. We've been able to optimize our chainstay shape, helping us to better maintain stiffness and strength. It is easier to set up and adjust and lighter. We use built-in rubber shock absorbers with the bashguard, reducing further the potential for frame damage. Finally, as the bashguard and chain guide are separate pieces, should either get damaged, you don't need to replace the entire system, just the piece itself.
$9,999.99
KEY FEATURES: - Scale Carbon HMX Frame - RockShox SID SL Ultimate RD3 100mm - RideLoc 2 / 3-Position Remote - SRAM XX1 Eagle AXS, PWR Meter - Shimano XTR Disc Brakes - Maxxis Rekon Race Foldable Tires The ALL-NEW Scale RC World Cup EVO is the perfect blend of stiffness, light weight, and 30 years of carbon expertise. These characteristics, encompassed in an uncompromising frame design decisively accelerate the Scale away from the pack with every pedal stroke. Whenever you find yourself up against the clock, tip the scales in your favor. TECHNOLOGIES: ADJUSTABLE HEAD ANGLE With the new Scale RC, you can adjust the head angle by 0.6 degrees slacker or steeper. This can be done without cutting cables or bleeding brakes. All you must do is disassemble the bar, rotate the headset cups 180 degrees, and reassemble. SYNCROS FRASER IC COMBO The New Scale features the Fraser iC combo from Syncros. Integrating the cables presents a number of unique problems and the Fraser was designed in part to address this. Syncros’s designers worked on the shape to allow the cables to flow under the bar and around the sides of the stem before disappearing into the headset with integrated plastic parts to keep it clean and efficient. This avoids bends or kinks in the cables and provides a minimalist front end. All our bars and stems feature multiple options for computer, light, and camera mounts both on top or under the bar. DESIGN The new Scale’s design was uncompromisingly subjected to our pursuit of perfection and drive for pure efficiency, strictly following the guiding principle of "Form follows Function". In our search for the ultimate, yet most simple construction, we’ve centered the design around the essentials by balancing the bike’s DNA in order to create a whole new breed of XC bike. The result is a straightforward and clear design, which provides the all-new Scale with its distinctive character and aggressive look: a bike that proudly shows off its characteristics. HOLLOW DROPOUT CONSTRUCTION The dropout features an advanced, hollow construction, which allows the axle head to clamp against the inner surface of the dropout and leaves the head flush with the surface. This enables the lightest possible construction approach and a clean-looking design from the outside. While being able to directly shave off 7.5g with the new dropout construction, the optimized design favors a narrower construction of the rear triangle area, which in turn enables a reduction of 20g in this area of the frame (HMX-SL). MONOCOQUE CONSTRUCTION The new Scale RC’s monocoque construction enables production using only one mold for the main section of the bike, the front triangle. Applying our carbon expertise, the new Scale, therefore, consists of only 3 separate pieces molded together. This directly translates into an increased level of efficiency due to the reduced number of junctions required therefore decreasing weight while keeping superior stiffness – something we’re always aiming for with hardtail race bikes. With the full frame constructed as a system, the monocoque design enables the frame to handle forces as a whole. SERVICE DOOR A little service door, which is accessible through a downtube cover, allows easy access to the interior of the frame without the need to remove the Bottom Bracket. Frame maintenance is made easy with regards to cable routing.
$9,999.99
When you think of the perfect mountain bike, what comes to mind? For us, it's the Spark 900. Why you ask? Well, beyond the fact that it is fast, lightweight, and ultra-capable on all sorts of terrain, it's just damned good-lookin'. Short-travel trail bike? "Downcountry" rig? Occasional race bike? Whatever, call it what you want to call it. All we know is that this is one hell of a mountain bike. KEY FEATURES - Spark Carbon HMF Frame - FOX 34 Float Factory 130mm Fork - FOX Nude 5T EVOL, TwinLoc, 120mm - SRAM X01 Eagle AXS 12 Speed - Shimano XT 4 Piston Disc Brakes - Schwalbe Wicked Will Tires TECHNOLOGIES: EVO-LAP TECHNOLOGY With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without sacrificing the stiffness, comfort or impact resistance. The entire range benefitted from our Evo-Lap technology. ADJUSTABLE HEAD ANGLE With the new Spark, you can adjust the head angle by .6 degrees slacker or steeper. This can be done without cutting cables or bleeding brakes. All you must do is disassemble the bar, rotate the headset cups 180 degrees, and reassemble. EASY SHOCK ACCESS Accessing the shock via the bottom bracket area is facilitated through a hatch. This makes it easy to adjust rebound, compression, shock pressure, and for installing or replacing the cable for our TwinLoc Suspension System. PATENTED INTEGRATED SUSPENSION SYSTEM An integrated shock platform allows us to refine suspension characteristics without sacrificing weight. Often, when working with bikes at this level, the concept of marginal gains becomes an ever important one. For the optimal performance of a suspension shock, power transfer must be the most direct possible. What we want to avoid are any inefficient directional movements, in other words, lateral movements (sideways to the direction of travel) as the shock goes through its compression. Having an integrated shock allows us to improve this in several ways. Firstly, the frame construction around the shock and with the trunnion mount can be designed to be much more rigid, reducing movement and fostering more efficient power transfer. We can also add much larger bearings to the seat tube pivot, further reinforcing this area and reducing any unnecessary motion. Our integrated Suspension technology also helps us to engineer frames with a lower shock placement which lowers center of gravity. As a result, the bike benefits from better handling, and a more stable, confidence-inspiring ride for the end user. While these may seem like minor improvements individually, the sum of their parts results in more efficient shock performance. Additionally, the shock is fully protected from any foreign elements. Rainy race? No problem, your shock will continue to perform at its best regardless. REAR AXLE TOOL Our rear axle tool has been a staple on our bikes for years, it is now better than ever. It features a T25, T30, and a 6 Allen key all in one. With these three options, you can adjust all pivot hardware and nearly everything else there is to adjust on the bicycle. SINGLE PIVOT SUSPENSION LAYOUT A full-suspension bike will never have success without, well, good suspension design. From the first time we rode the Spark’s single pivot layout we fell in love. Years later, we still believe that for technical cross-country racing and fast, punchy singletrack it is the best approach. The Spark’s suspension layout has a very specific and proven kinematic and less unsprung mass. Using a flex pivot in the seat stay is an ideal solution for bikes in this travel range. This allows us to keep a very lightweight system while still ensuring optimal suspension performance. Please note that bike specifications are subject to change without prior notice.
$9,499.99
The Contessa Spark RC World Cup is the perfect blend of top-notch carbon engineering, never before seen levels of integration and just the right amount of secret sauce. We wanted to make this platform faster than ever before both up and down the hill. Increasing travel, perfecting geometry, and applying input from the world's best athletes, we've created the cross country race bike of all cross country race bikes. If you think fast is fun, then you're going to love this ride. *Please note that bike specifications are subject to change without prior notice KEY FEATURES - Spark RC Carbon HMX Frame - RockShox SID Select+ RL3 120mm Fork - RS Nude 5 RL3, 120mm, TwinLoc - SRAM X01 Eagle AXS 12 Speed - SRAM Level Disc Brakes - Maxxis Rekon Race Foldable Tires
$9,499.99
The Spark RC World Cup EVO is the perfect blend of top-notch carbon engineering, never before seen levels of integration, and just the right amount of secret sauce. We wanted to make this platform faster than ever before both up and down the hill. Increasing travel, perfecting geometry, and applying input from the world's best athletes, we've created the cross-country race bike of all cross-country race bikes. If you think fast is fun, then you're going to love this ride. KEY FEATURES - Spark RC Carbon HMX Frame - RockShox SID Select+ RL3 120mm Fork - RS Nude 5 RL3, 120mm, TwinLoc - SRAM X01 Eagle AXS 12 Speed - SRAM Level Disc Brakes - Maxxis Rekon Race Foldable Tires TECHNOLOGIES: EVO-LAP TECHNOLOGY But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we've optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without sacrificing the stiffness, comfort or impact resistance. The entire range benefitted from our Evo-Lap technology. ADJUSTABLE HEAD ANGLE With the new Spark, you can adjust the head angle by .6 degrees slacker or steeper. This can be done without cutting cables or bleeding brakes. All you must do is disassemble the bar, rotate the headset cups 180 degrees, and reassemble. EASY SHOCK ACCESS Accessing the shock via the bottom bracket area is facilitated through a hatch. This makes it easy to adjust rebound, compression, shock pressure, and for installing or replacing the cable for our TwinLoc Suspension System. PATENTED INTEGRATED SUSPENSION SYSTEM An integrated shock platform allows us to refine suspension characteristics without sacrificing weight. Often, when working with bikes at this level, the concept of marginal gains becomes an ever important one. For the optimal performance of a suspension shock, power transfer must be the most direct possible. What we want to avoid are any inefficient directional movements, in other words, lateral movements (sideways to the direction of travel) as the shock goes through its compression. Having an integrated shock allows us to improve this in several ways. Firstly, the frame construction around the shock and with the trunnion mount can be designed to be much more rigid, reducing movement and fostering more efficient power transfer. We can also add much larger bearings to the seat tube pivot, further reinforcing this area and reducing any unnecessary motion. Our integrated Suspension technology also helps us to engineer frames with a lower shock placement which lowers center of gravity. As a result, the bike benefits from better handling, and a more stable, confidence-inspiring ride for the end user. While these may seem like minor improvements individually, the sum of their parts results in more efficient shock performance. Additionally, the shock is fully protected from any foreign elements. Rainy race? No problem, your shock will continue to perform at its best regardless. REAR AXLE TOOL Our rear axle tool has been a staple on our bikes for years, it is now better than ever. It features a T25, T30, and a 6 allen key all in one. With these three options, you can adjust all pivot hardware and nearly everything else there is to adjust on the bicycle. SINGLE PIVOT SUSPENSION LAYOUT A full-suspension bike will never have success without, well, good suspension design. From the first time we rode the Spark's single pivot layout we fell in love. Years later, we still believe that for technical cross-country racing and fast, punchy singletrack it is the best approach. The Spark's suspension layout has a very specific and proven kinematic and less unsprung mass. Using a flex pivot in the seat stay is an ideal solution for bikes in this travel range. This allows us to keep a very lightweight system while still ensuring optimal suspension performance. Please note that bike specifications are subject to change without prior notice.
$8,600.00
The New Cutting Edge. This is the ultimate XC race bike. Ground-breaking suspension, aggressive geometry, and feathery weight let you go full gas from the gun. Where it thrives On the race course What it's built for Chasing podiums Highlights: - Ultralight carbon FlexPivot frame & Lefty Ocho Carbon fork - 100mm travel F-R / Integrated Cannondale App connectivity - SRAM XO1 AXS electronic 12-speed shifting / Level TLM hydraulic disc brakes - HollowGram 25 S carbon tubeless-ready wheels / Cannondale 1 carbon post & bar / Stash kit Technology: Suspension for speed - The most advanced suspension ever made for XC. While others sacrifice performance to save weight, our patented FlexPivot suspension delivers both. Incredibly light, with unreal grip, acceleration, and control, it lets you go flat-out everywhere. More speed. More fun. Degrees of difference - Scalpel's progressive geometry has evolved even further – we have a full degree and a half slacker headtube angle, a one-degree steeper seat tube angle – creating an XC bike that's more aggressive, lightning-fast, fun, and stable everywhere, from the World Cup to your local loop. Stiff. Light. Fast. - At just over 1900 grams, complete with shock, the new Scalpel frame is one of the lightest full-suspension MTB frames on the market. Incredible suspension, impeccable handling, and feathery weight – it's a recipe for victory. The World's Best XC Fork - Lefty Ocho is simply the most advanced, smoothest, most precise-handling ultralight fork ever made. Its one-of-a-kind design lets you float through the chop and slice through the chunder like nothing else.
$7,699.99
The Spark RC Pro is the perfect blend of top-notch carbon engineering, never before seen levels of integration, and just the right amount of secret sauce. We wanted to make this platform faster than ever before both up and down the hill. Increasing travel, perfecting geometry, and applying input from the world's best athletes, we've created the cross-country race bike of all cross-country race bikes. If you think fast is fun, then you're going to love this ride. KEY FEATURES - Spark RC Carbon HMF Frame - RockShox SID Select+ RL3 120mm Fork - FOX Nude 5 EVOL, 120mm, TwinLoc - Shimano XTR 12 Speed - Shimano XTR Disc Brakes - Maxxis Rekon Race Foldable Tires TECHNOLOGIES: EVO-LAP TECHNOLOGY But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we've optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without sacrificing the stiffness, comfort or impact resistance. The entire range benefitted from our Evo-Lap technology. ADJUSTABLE HEAD ANGLE With the new Spark, you can adjust the head angle by .6 degrees slacker or steeper. This can be done without cutting cables or bleeding brakes. All you must do is disassemble the bar, rotate the headset cups 180 degrees, and reassemble. EASY SHOCK ACCESS Accessing the shock via the bottom bracket area is facilitated through a hatch. This makes it easy to adjust rebound, compression, shock pressure, and for installing or replacing the cable for our TwinLoc Suspension System. PATENTED INTEGRATED SUSPENSION SYSTEM An integrated shock platform allows us to refine suspension characteristics without sacrificing weight. Often, when working with bikes at this level, the concept of marginal gains becomes an ever important one. For the optimal performance of a suspension shock, power transfer must be the most direct possible. What we want to avoid are any inefficient directional movements, in other words, lateral movements (sideways to the direction of travel) as the shock goes through its compression. Having an integrated shock allows us to improve this in several ways. Firstly, the frame construction around the shock and with the trunnion mount can be designed to be much more rigid, reducing movement and fostering more efficient power transfer. We can also add much larger bearings to the seat tube pivot, further reinforcing this area and reducing any unnecessary motion. Our integrated Suspension technology also helps us to engineer frames with a lower shock placement which lowers center of gravity. As a result, the bike benefits from better handling, and a more stable, confidence-inspiring ride for the end user. While these may seem like minor improvements individually, the sum of their parts results in more efficient shock performance. Additionally, the shock is fully protected from any foreign elements. Rainy race? No problem, your shock will continue to perform at its best regardless. REAR AXLE TOOL Our rear axle tool has been a staple on our bikes for years, it is now better than ever. It features a T25, T30, and a 6 allen key all in one. With these three options, you can adjust all pivot hardware and nearly everything else there is to adjust on the bicycle. SINGLE PIVOT SUSPENSION LAYOUT A full-suspension bike will never have success without, well, good suspension design. From the first time we rode the Spark's single pivot layout we fell in love. Years later, we still believe that for technical cross-country racing and fast, punchy singletrack it is the best approach. The Spark's suspension layout has a very specific and proven kinematic and less unsprung mass. Using a flex pivot in the seat stay is an ideal solution for bikes in this travel range. This allows us to keep a very lightweight system while still ensuring optimal suspension performance. Please note that bike specifications are subject to change without prior notice.
$7,599.99
Made to go up the mountain in a hurry, and down the mountain even faster. The all new Genius ST features a custom Float X Nude shock from FOX and is the perfect bike for those who have an insatiable hunger for rippin' trail. *Please note that bike specifications are subject to change without prior notice KEY FEATURES - Genius Carbon HMF-Alloy Frame - FOX 36 P. Elite Grip2 160mm Fork - FOX Float X Nude, TracLoc, 150mm - SRAM GX Eagle AXS 12 Speed - Shimano XT 4 Piston Disc Brakes - Maxxis Foldable Tires
$7,599.99
KEY FEATURES: - Genius Carbon HMF-Alloy Frame - FOX 36 Float Perf. Elite 160mm Fork - FOX Nude 5T EVOL, TwinLoc, 150mm - SRAM GX Eagle AXS 12 Speed - Shimano XT 4 Piston Disc Brakes - Maxxis Foldable Tires The Genius has always been our favorite bike. Smart suspension, smarter features, and the smartest design lead to an unbelievable trail bike that just can't get enough. The All-New Genius, any trail, any time. TECHNOLOGIES: PATENTED INTEGRATED SUSPENSION TECHNOLOGY The new Genius applies our patented Integrated Suspension Technology. Not only does this make for a fantastic looking bike, but it also allows us to improve the bike's suspension performance. Primarily, we can engineer frames with a lower center of gravity, resulting in better handling, and a more stable, confidence inspiring ride for the end user. Additionally, the frame’s construction is stiffer around the BB, which reduces unnecessary movements laterally to the direction of the shock’s travel. It goes without saying that the shock is also protected from debris and the elements, two of the main enemies when it comes to shock performance. EXTERNAL SAG INDICATOR Setting sag and checking travel use is easier than ever before with the new Genius. An external indicator on the link allows the end user to easily set sag and to identify how much travel they’re using. INTEGRATED HEADSET CABLE ROUTING The Genius features a Hixon Cockpit from Syncros, which has undergone a redesign. Integrating the cables presents a number of unique problems and the Hixon was designed in part to address this. Syncros’s designers worked on the shape to allow the cables to flow under the bar and around the sides of the stem before disappearing into the headset with integrated plastic parts to keep it clean and efficient. This avoids bends or kinks in the cables and provides a minimalist front end. All our bars and stems feature multiple options for computer, light, and camera mounts both on top or under the bar. EASY SHOCK ACCESS With the all-new Genius, accessing our patented integrated shock is easier than ever. Just push the button, pop off the cover, and access is yours. From here, adjusting rebound, air pressure, etc. is a mere button push away. When you're done, just pop the cover back on until you hear a "click" and off you go. NUDE SUSPENSION TECHNOLOGY Shocks with NUDE Technology have been integral to SCOTT Full suspension bikes for nearly two decades. Working closely with our suspension partners, we continue to improve upon this technology so that whether you're racing World Cups at the highest level or out for a big day in the mountains, you'll always have the best support on offer. TWINLOC SUSPENSION SYSTEM With TwinLoc, a rider can effectively control the complete frame, fork, and shock as a system. Why does this matter? A bike with 150mm of suspension travel, correctly set up, has more sag than a bike with 130mm. It's that extra travel that makes it more fun to ride and more capable on the descents, but the greater sag has an oversized effect on the bike's geometry and climbing performance. That's where TwinLoc matters. TwinLoc helps manage the sag effect in several ways. Whereas most systems only increase low-speed compression in an effort to gain pedaling efficiency, TwinLoc allows us to not only change compression damping, but also to change the spring curve, dynamically altering the geometry of the bike. In Trail mode, the shock is not only firmer, but it has dynamically less travel. The bike sits higher, maintains a steep seat angle for those climbs, and becomes more agile. We also offer a third, full lockout mode for going up in the most efficient manner possible. These unique settings optimize climbing geometry, even on longer travel bikes. We can eliminate the "long travel effect" that can rob your pedaling efficiency, but we're not robbing you of the full-fun, 150mm travel when you point it downhill. From a race setting to a lunch ride, to an after-work trail shred, being able to switch from mode to mode depending on a trail's profile at the push of a lever is paramount to riding faster and having a damned good time.
$7,599.99
KEY FEATURES: - Genius Carbon HMF-Alloy Frame - Ohlins RXF36m.2 Air 160mm - FOX FLOAT X Nude, TracLoc, 150mm - SRAM GX Eagle AXS 12 Speed - Shimano XT 4 Piston Disc Brakes - Maxxis Foldable Tires Made to go up the mountain in a hurry, and down the mountain even faster. The all-new Genius ST features a custom Float X Nude shock from FOX and is the perfect bike for those who have an insatiable hunger for rippin' trail. Please note that bike specifications are subject to change without prior notice. TECHNOLOGIES: PATENTED INTEGRATED SUSPENSION TECHNOLOGY The new Genius applies our patented Integrated Suspension Technology. Not only does this make for a fantastic looking bike, but it also allows us to improve the bike's suspension performance. Primarily, we can engineer frames with a lower center of gravity, resulting in better handling, and a more stable, confidence inspiring ride for the end user. Additionally, the frame’s construction is stiffer around the BB, which reduces unnecessary movements laterally to the direction of the shock’s travel. It goes without saying that the shock is also protected from debris and the elements, two of the main enemies when it comes to shock performance. EXTERNAL SAG INDICATOR Setting sag and checking travel use is easier than ever before with the new Genius. An external indicator on the link allows the end user to easily set sag and to identify how much travel they’re using. INTEGRATED HEADSET CABLE ROUTING The Genius features a Hixon Cockpit from Syncros, which has undergone a redesign. Integrating the cables presents a number of unique problems and the Hixon was designed in part to address this. Syncros’s designers worked on the shape to allow the cables to flow under the bar and around the sides of the stem before disappearing into the headset with integrated plastic parts to keep it clean and efficient. This avoids bends or kinks in the cables and provides a minimalist front end. All our bars and stems feature multiple options for computer, light, and camera mounts both on top or under the bar. EASY SHOCK ACCESS With the all-new Genius, accessing our patented integrated shock is easier than ever. Just push the button, pop off the cover, and access is yours. From here, adjusting rebound, air pressure, etc. is a mere button push away. When you're done, just pop the cover back on until you hear a "click" and off you go. SUPER TRAIL FAMILY SCOTT's Super Trail line is a new, progressive specification of Mountain Bikes and E-MTB's featuring suspension components that favor more adjustability. Bikes in the ST range are tailored more toward the downhill part of the ride. NUDE SUSPENSION TECHNOLOGY Shocks with NUDE Technology have been integral to SCOTT Full suspension bikes for nearly two decades. Working closely with our suspension partners, we continue to improve upon this technology so that whether you're racing World Cups at the highest level or out for a big day in the mountains, you'll always have the best support on offer.
$7,499.99
KEY FEATURES: - Scale Carbon HMX Frame - RockShox SID SL Select+RL3 100mm - RideLoc 2 / 3-Position Remote - SRAM X01 Eagle AXS 12 Speed - SRAM Level Disc Brakes - Maxxis Rekon Race Foldable Tires The ALL-NEW Scale RC World Cup is the perfect blend of stiffness, lightweight, and 30 years of carbon expertise. These characteristics, encompassed in an uncompromising frame design decisively accelerate the Scale away from the pack with every pedal stroke. Whenever you find yourself up against the clock, tip the scales in your favor. TECHNOLOGIES: ADJUSTABLE HEAD ANGLE With the new Scale RC, you can adjust the head angle by 0.6 degrees slacker or steeper. This can be done without cutting cables or bleeding brakes. All you must do is disassemble the bar, rotate the headset cups 180 degrees, and reassemble. SYNCROS FRASER IC COMBO The New Scale features the Fraser iC combo from Syncros. Integrating the cables presents a number of unique problems and the Fraser was designed in part to address this. Syncros’s designers worked on the shape to allow the cables to flow under the bar and around the sides of the stem before disappearing into the headset with integrated plastic parts to keep it clean and efficient. This avoids bends or kinks in the cables and provides a minimalist front end. All our bars and stems feature multiple options for computer, light, and camera mounts both on top or under the bar. DESIGN The new Scale’s design was uncompromisingly subjected to our pursuit of perfection and drive for pure efficiency, strictly following the guiding principle of "Form follows Function". In our search for the ultimate, yet most simple construction, we’ve centered the design around the essentials by balancing the bike’s DNA in order to create a whole new breed of XC bike. The result is a straightforward and clear design, which provides the all-new Scale with its distinctive character and aggressive look: a bike that proudly shows off its characteristics. HOLLOW DROPOUT CONSTRUCTION The dropout features an advanced, hollow construction, which allows the axle head to clamp against the inner surface of the dropout and leaves the head flush with the surface. This enables the lightest possible construction approach and a clean-looking design from the outside. While being able to directly shave off 7.5g with the new dropout construction, the optimized design favors a narrower construction of the rear triangle area, which in turn enables a reduction of 20g in this area of the frame (HMX-SL). MONOCOQUE CONSTRUCTION The new Scale RC’s monocoque construction enables production using only one mold for the main section of the bike, the front triangle. Applying our carbon expertise, the new Scale, therefore, consists of only 3 separate pieces molded together. This directly translates into an increased level of efficiency due to the reduced number of junctions required therefore decreasing weight while keeping superior stiffness – something we’re always aiming for with hardtail race bikes. With the full frame constructed as a system, the monocoque design enables the frame to handle forces as a whole. SERVICE DOOR A little service door, which is accessible through a downtube cover, allows easy access to the interior of the frame without the need to remove the Bottom Bracket. Frame maintenance is made easy with regards to cable routing.
$6,999.99
KEY FEATURES: - Ransom Carbon HMX-Alloy Frame - FOX 38 Grip2 Perf. Elite 170mm Fork - FOX Nude TR EVOL, Tracloc, 170mm - SRAM GX Eagle 12 Speed - Shimano XT 4 Piston Disc Brakes - Maxxis EXO+ Tires The Ransom. This Enduro Mountain Bike features 170mm of trail munchin', climb-crushing, stage-winning all-day pinning mountain biking excellence. The 910 comes equipped with a FOX 38 fork, our TracLoc Suspension System, a SRAM Eagle groupset, and Syncros components to help you get away with murder, regardless of your ability level. EVO-LAP TECHNOLOGY With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. With our Evo-Lap technology, we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without sacrificing the stiffness, comfort or impact resistance. The entire range benefitted from our Evo-Lap technology. NUDE SUSPENSION TECHNOLOGY Shocks with NUDE Technology have been integral to SCOTT Full suspension bikes for nearly two decades. Working closely with our suspension partners, we continue to improve upon this technology so that whether you're racing World Cups at the highest level or out for a big day in the mountains, you'll always have the best support on offer. RANSOM CARBON CONSTRUCTION While we always aim to have lightweight carbon bikes here at SCOTT, we never compromise frame strength when doing so. Taking into consideration the riding this bike is designed for, we have created our strongest carbon frame to date. Through clever layering and reinforcement in certain zones, we obtain the stiffness wanted between the head tube and the rear wheel axle via a path following the downtube and the chainstays - we call this the stiffness backbone. The Ransom being a 1x-only bike allowed us to optimize the width of the main pivot which is normally the weak point on this stiffness path. Additionally, the Trunnion mount on the DT close to the BB allows us to obtain great stiffness at the bottom of the bike and lightweight construction up top for compliance and for having the center of gravity as low as possible. RANSOM PROTECTION Protecting the Ransom's frame was an integral part of the project. We've integrated a clever DT protector under the BB and along the downtube, and have also implemented a newly developed, noise-silencing Chainstay/seatstay protector. A quiet ride is a fast ride.
$6,500.00
Hold on Tight - Thrill ride. With the most advanced XC suspension and geometry, and rowdy-ready spec, the new Scalpel redefines cross-country speed – again. Highlights - Superlight premium Series 1 Carbon frame with FlexPivot, 120mm travel, and Proportional Response-Tuned Suspension and Geometry - Race-ready RockShox SID Select+ 120mm fork and SIDLuxe Select+ rear shock - Durable, smooth-shifting SRAM GX Eagle AXS Transmission electronic wireless 12-speed group with Level Bronze Stealth brakes - Light and fast Cannondale HollowGram XC-S 27 carbon cross-country wheelset - Fox Transfer SL dropper seatpost
$6,499.99
The Spark RC SL is the perfect blend of top-notch carbon engineering, never before seen levels of integration and just the right amount of secret sauce. We wanted to make this platform faster than ever before both up and down the hill. Increasing travel, perfecting geometry, and applying input from the world's best athletes, we've created the cross country race bike of all cross country race bikes. If you think fast is fun, then you're going to love this ride. Please note that bike specifications are subject to change without prior notice.
$6,499.99
The Spark RC Team Issue is the perfect blend of top-notch carbon engineering, never before seen levels of integration, and just the right amount of secret sauce. We wanted to make this platform faster than ever before both up and down the hill. Increasing travel, perfecting geometry, and applying input from the world's best athletes, we've created the cross-country race bike of all cross-country race bikes. If you think fast is fun, then you're going to love this ride. KEY FEATURES - Spark RC Carbon HMF Frame - FOX 34 SC Float Perf. 120mm Fork - FOX Nude 5 EVOL, 120mm, TwinLoc - SRAM GX Eagle AXS 12 Speed - Shimano XT Disc Brakes Maxxis Rekon Race Foldable Tires TECHNOLOGIES: EVO-LAP TECHNOLOGY But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we've optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without sacrificing the stiffness, comfort or impact resistance. The entire range benefitted from our Evo-Lap technology. ADJUSTABLE HEAD ANGLE With the new Spark, you can adjust the head angle by .6 degrees slacker or steeper. This can be done without cutting cables or bleeding brakes. All you must do is disassemble the bar, rotate the headset cups 180 degrees, and reassemble. EASY SHOCK ACCESS Accessing the shock via the bottom bracket area is facilitated through a hatch. This makes it easy to adjust rebound, compression, shock pressure, and for installing or replacing the cable for our TwinLoc Suspension System. PATENTED INTEGRATED SUSPENSION SYSTEM An integrated shock platform allows us to refine suspension characteristics without sacrificing weight. Often, when working with bikes at this level, the concept of marginal gains becomes an ever important one. For the optimal performance of a suspension shock, power transfer must be the most direct possible. What we want to avoid are any inefficient directional movements, in other words, lateral movements (sideways to the direction of travel) as the shock goes through its compression. Having an integrated shock allows us to improve this in several ways. Firstly, the frame construction around the shock and with the trunnion mount can be designed to be much more rigid, reducing movement and fostering more efficient power transfer. We can also add much larger bearings to the seat tube pivot, further reinforcing this area and reducing any unnecessary motion. Our integrated Suspension technology also helps us to engineer frames with a lower shock placement which lowers center of gravity. As a result, the bike benefits from better handling, and a more stable, confidence-inspiring ride for the end user. While these may seem like minor improvements individually, the sum of their parts results in more efficient shock performance. Additionally, the shock is fully protected from any foreign elements. Rainy race? No problem, your shock will continue to perform at its best regardless. REAR AXLE TOOL Our rear axle tool has been a staple on our bikes for years, it is now better than ever. It features a T25, T30, and a 6 allen key all in one. With these three options, you can adjust all pivot hardware and nearly everything else there is to adjust on the bicycle. SINGLE PIVOT SUSPENSION LAYOUT A full-suspension bike will never have success without, well, good suspension design. From the first time we rode the Spark's single pivot layout we fell in love. Years later, we still believe that for technical cross-country racing and fast, punchy singletrack it is the best approach. The Spark's suspension layout has a very specific and proven kinematic and less unsprung mass. Using a flex pivot in the seat stay is an ideal solution for bikes in this travel range. This allows us to keep a very lightweight system while still ensuring optimal suspension performance. Please note that bike specifications are subject to change without prior notice.
$6,350.00
This is the ultimate XC race bike. Ground-breaking suspension, aggressive geometry and feathery weight let you go full gas from the gun. Grip where others slip. Attack where others lack. Dominate where others hesitate. Welcome to the new school. Stiff. Light. Fast. - At just over 1900 grams, complete with shock, the new Scalpel frame is one of the lightest full suspension MTB frames on the market. Incredible suspension, impeccable handling and feathery weight – it’s a recipe for victory. Suspension for speed - The most advanced suspension ever made for XC. While others sacrifice performance to save weight, our patented FlexPivot suspension delivers both. Incredibly light, with unreal grip, acceleration and control, it lets you go flat-out everywhere. More speed. More fun. The World's Best XC Fork - Lefty Ocho is simply the most advanced, smoothest, most precise-handling ultralight fork ever made. Its one-of-a-kind design lets you float through the chop and slice through the chunder like nothing else. Degrees of difference - Scalpel’s progressive geometry has evolved even further – we have a full degree and a half slacker headtube angle, one-degree steeper seat tube angle – creating an XC bike that’s more aggressive, lightning-fast, fun and stable everywhere, from the World Cup to your local loop. - Lightweight BallisTec carbon FlexPivot frame / Lefty Ocho fork / Integrated Cannondale App connectivity - Shimano XT hydro disc 12-speed group / HollowGram crank - HollowGram 25 carbon tubeless-ready wheels / Stash onboard repair kit - Where it thrives: On the race course - What it's built for: Chasing podiums
$6,299.99
When you think of the perfect mountain bike, what comes to mind? For us, it's the Contessa Spark 910. Why, you ask? Well, beyond the fact that it is fast, lightweight and ultra capable on all sorts of terrain, it's just damned good lookin'. Short-travel trail bike? "Downcountry" rig? Occasional race bike? Whatever, call it what you want to call it. All we know is that this is one hell of a mountain bike. *Please note that bike specifications are subject to change without prior notice KEY FEATURES - Spark Carbon HMF-Alloy Frame - FOX 34 Float Perf. 130mm Fork - FOX Nude 5T EVOL, TwinLoc, 120mm - SRAM GX Eagle AXS 12 Speed - SRAM DB8 4 Piston Disc Brakes - Schwalbe Wicked Will Tires
$6,299.99
When you think of the perfect mountain bike, what comes to mind? For us, it's the Spark 910. Why you ask? Well, beyond the fact that it is fast, lightweight and ultra-capable on all sorts of terrain, it's just damned good-lookin'. Short-travel trail bike? "Downcountry" rig? Occasional race bike? Whatever, call it what you want to call it. All we know is that this is one hell of a mountain bike. KEY FEATURES - Spark Carbon HMF Frame - FOX 34 Float P. Elite 130mm Fork - FOX Nude 5T EVOL, TwinLoc, 120mm - Shimano XT 12 Speed - Shimano XT 4 Piston Disc Brakes - Schwalbe Wicked Will Tires TECHNOLOGIES: EVO-LAP TECHNOLOGY With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without sacrificing the stiffness, comfort or impact resistance. The entire range benefitted from our Evo-Lap technology. ADJUSTABLE HEAD ANGLE With the new Spark, you can adjust the head angle by .6 degrees slacker or steeper. This can be done without cutting cables or bleeding brakes. All you must do is disassemble the bar, rotate the headset cups 180 degrees, and reassemble. EASY SHOCK ACCESS Accessing the shock via the bottom bracket area is facilitated through a hatch. This makes it easy to adjust rebound, compression, shock pressure, and for installing or replacing the cable for our TwinLoc Suspension System. PATENTED INTEGRATED SUSPENSION SYSTEM An integrated shock platform allows us to refine suspension characteristics without sacrificing weight. Often, when working with bikes at this level, the concept of marginal gains becomes an ever important one. For the optimal performance of a suspension shock, power transfer must be the most direct possible. What we want to avoid are any inefficient directional movements, in other words, lateral movements (sideways to the direction of travel) as the shock goes through its compression. Having an integrated shock allows us to improve this in several ways. Firstly, the frame construction around the shock and with the trunnion mount can be designed to be much more rigid, reducing movement and fostering more efficient power transfer. We can also add much larger bearings to the seat tube pivot, further reinforcing this area and reducing any unnecessary motion. Our integrated Suspension technology also helps us to engineer frames with a lower shock placement which lowers center of gravity. As a result, the bike benefits from better handling, and a more stable, confidence-inspiring ride for the end user. While these may seem like minor improvements individually, the sum of their parts results in more efficient shock performance. Additionally, the shock is fully protected from any foreign elements. Rainy race? No problem, your shock will continue to perform at its best regardless. REAR AXLE TOOL Our rear axle tool has been a staple on our bikes for years, it is now better than ever. It features a T25, T30, and a 6 Allen key all in one. With these three options, you can adjust all pivot hardware and nearly everything else there is to adjust on the bicycle. SINGLE PIVOT SUSPENSION LAYOUT A full-suspension bike will never have success without, well, good suspension design. From the first time we rode the Spark’s single pivot layout we fell in love. Years later, we still believe that for technical cross-country racing and fast, punchy singletrack it is the best approach. The Spark’s suspension layout has a very specific and proven kinematic and less unsprung mass. Using a flex pivot in the seat stay is an ideal solution for bikes in this travel range. This allows us to keep a very lightweight system while still ensuring optimal suspension performance. Please note that bike specifications are subject to change without prior notice.
$6,299.99
When you think of the perfect mountain bike, what comes to mind? For us, it's the Spark 920. Why you ask? Well, beyond the fact that it is fast, lightweight, and ultra-capable on all sorts of terrain, it's just damned good-lookin'. Short-travel trail bike? "Downcountry" rig? Occasional race bike? Whatever, call it what you want to call it. All we know is that this is one hell of a mountain bike. KEY FEATURES - Spark Carbon HMF-Alloy Frame - FOX 34 Float Perf. 130mm Fork - FOX Nude 5T EVOL, TwinLoc, 120mm - SRAM GX Eagle AXS 12 Speed - SRAM DB8 4 Piston Disc Brakes - Schwalbe Wicked Will Tires TECHNOLOGIES: EVO-LAP TECHNOLOGY With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without sacrificing the stiffness, comfort or impact resistance. The entire range benefitted from our Evo-Lap technology. ADJUSTABLE HEAD ANGLE With the new Spark, you can adjust the head angle by .6 degrees slacker or steeper. This can be done without cutting cables or bleeding brakes. All you must do is disassemble the bar, rotate the headset cups 180 degrees, and reassemble. EASY SHOCK ACCESS Accessing the shock via the bottom bracket area is facilitated through a hatch. This makes it easy to adjust rebound, compression, shock pressure, and for installing or replacing the cable for our TwinLoc Suspension System. PATENTED INTEGRATED SUSPENSION SYSTEM An integrated shock platform allows us to refine suspension characteristics without sacrificing weight. Often, when working with bikes at this level, the concept of marginal gains becomes an ever important one. For the optimal performance of a suspension shock, power transfer must be the most direct possible. What we want to avoid are any inefficient directional movements, in other words, lateral movements (sideways to the direction of travel) as the shock goes through its compression. Having an integrated shock allows us to improve this in several ways. Firstly, the frame construction around the shock and with the trunnion mount can be designed to be much more rigid, reducing movement and fostering more efficient power transfer. We can also add much larger bearings to the seat tube pivot, further reinforcing this area and reducing any unnecessary motion. Our integrated Suspension technology also helps us to engineer frames with a lower shock placement which lowers center of gravity. As a result, the bike benefits from better handling, and a more stable, confidence-inspiring ride for the end user. While these may seem like minor improvements individually, the sum of their parts results in more efficient shock performance. Additionally, the shock is fully protected from any foreign elements. Rainy race? No problem, your shock will continue to perform at its best regardless. REAR AXLE TOOL Our rear axle tool has been a staple on our bikes for years, it is now better than ever. It features a T25, T30, and a 6 Allen key all in one. With these three options, you can adjust all pivot hardware and nearly everything else there is to adjust on the bicycle. SINGLE PIVOT SUSPENSION LAYOUT A full-suspension bike will never have success without, well, good suspension design. From the first time we rode the Spark’s single pivot layout we fell in love. Years later, we still believe that for technical cross-country racing and fast, punchy singletrack it is the best approach. The Spark’s suspension layout has a very specific and proven kinematic and less unsprung mass. Using a flex pivot in the seat stay is an ideal solution for bikes in this travel range. This allows us to keep a very lightweight system while still ensuring optimal suspension performance. Please note that bike specifications are subject to change without prior notice.
$6,250.00
See you at the bottom Even though Jekyll boasts a unique combo of go-fast tech that's never been seen before, it's not a bike that talks. It's a bike that goes. Where it thrives Steep, fast, rowdy mountains What it's built for Enduro racing, bike park sessions, high-speed mobbing Highlights - Fox Float Factory 38, 170mm / Float Factory X2 Shock - SRAM GX/X1 Eagle 12-speed drivetrain / Code RSC hydraulic disc brakes - HollowGram SAVE carbon riser bar / DownLow dropper post Descend into Greatness It’s a hell of a climber but come on. Jekyll was born for the downs. Every part of it crafted for the sweet embrace of speed, every element designed to help you wring a bit more of velocity’s nectar from those steep, chunky, high pucker lines you love. Best. Suspension. Ever. 4-bar meets high pivot meets idler pulley meets size-specific kinematics. For real. If you’re not up for suspension buzzword bingo, just know that it grips, floats, and pedals like nothing else. It’s always up for getting down. The Gravity Cavity The shock tucks cleanly into the twin spar downtube, keeping the bike's center of gravity as low as possible. Wicked stability, instant line changes and one-of-a-kind looks. Built for You Well, not you specifically. But someone just like you. With our Proportional Response design, everything—from the suspension layout to the geometry, even the length of the chainstays—is completely customized by size, for performance built just for you. Suspension Like No Other High main pivot gives it a bump-swallowing rearward axle path. The Guidler pulley kills the pedal kickback of high pivot systems. The 4-bar linkage keeps braking smooth, traction high and pedaling crisp. Guidler Idler pulley + chainguide = Guidler. Clever, right? Idler eliminates feedback from the high pivot swingarm, keeping your pedal stroke smooth, even when the terrain isn't. The guide, well, it guides. Suspension Built For You A rider's center of gravity drives how the suspension performs, yet most bikes use the exact same layout for all sizes. Proportional Response Suspension alters the design by size for truly next-level performance. Proportional Response Geometry Long, slack and low—and fully size-specific. As the front of the bike gets longer with each size, the chain stay length increases proportionally, keeping the rider centered between the wheels for true "made for you" handling. Guardhouse Downtube protector keeps your frame safe from roost and strikes, while letting water and debris pass through. The Ai Advantage Our Ai Offset Drivetrain delivers more tire and mud clearance in the swingarm, and more even spoke angles for a stiffer, stronger rear wheel.
$6,250.00
See you at the bottom Even though Jekyll boasts a unique combo of go-fast tech that's never been seen before, it's not a bike that talks. It's a bike that goes. Where it thrives: Steep, fast, rowdy mountains What it's built for: Enduro racing, bike park sessions, high-speed mobbing Highlights: Fox Float Factory 38, 170mm / Float Factory X2 Shock SRAM GX Eagle 12-speed drivetrain / Code RSC hydraulic disc brakes HollowGram SAVE carbon riser bar / DownLow dropper post Descend into Greatness It’s a hell of a climber but come on. Jekyll was born for the downs. Every part of it crafted for the sweet embrace of speed, every element designed to help you wring a bit more of velocity’s nectar from those steep, chunky, high pucker lines you love. Best. Suspension. Ever. 4-bar meets high pivot meets idler pulley meets size-specific kinematics. For real. If you’re not up for suspension buzzword bingo, just know that it grips, floats, and pedals like nothing else. It’s always up for getting down. The Gravity Cavity The shock tucks cleanly into the twin spar downtube, keeping the bike's center of gravity as low as possible. Wicked stability, instant line changes and one-of-a-kind looks. Built for You Well, not you specifically. But someone just like you. With our Proportional Response design, everything - from the suspension layout to the geometry, even the length of the chainstays - is completely customized by size, for performance built just for you.
$6,150.00
The New Cutting Edge Scalpel SE is the ultimate marathon racer and high-speed trail slayer. World Cup fast and all-mountain fierce – this is next-level cross-country mountain bike performance. Where it thrives - High-speed trails What it's built for - Full-throttle trail riding Highlights: - Lightweight carbon FlexPivot frame / New RockShox Sid Select+ RL 120mm fork / Integrated Cannondale App connectivity - Shimano XT hydraulic disc 12-speed group / HollowGram crank - HollowGram 25 S carbon tubeless-ready wheels / Cannondale DownLow dropper post / Stash kit Superior suspension. Superior traction. Scalpel SE's patented FlexPivot suspension results in more grip, more control, and more speed. 120mm of plush travel works so well that it feels like so much more – meaning all-day singletrack sessions are a gas. Big trail capability Scalpel's progressive XC attitude has evolved even further with a slack and stable 67° headtube angle – combined with shorter stems, bigger tires, dropper posts, and bigger travel: if you love riding trails fast, precise, and in full control, then this is the bike for you. Light. Stiff. Fast. Don't settle for just two. Pick all three. With its full carbon frame and new 4-bar FlexPivot suspension, the Scalpel is one of the lightest and stiffest full-suspension mountain bikes available. Built light to go fast = built right to have a blast.
Page 1 of 4 Next page