Filter By:
- Lubes/Cleaners (263)
- Tools (1294)
- Workstands (64)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Tools/Maintenance
$9.00
The 45NRTH stud insertion tool seats and removes the stud from the stud pocket. Customize your stud tread pattern or replace missing studs. Works with all 45NRTH studdable and studded products.
- Tire studs sold separately
- POM-injected handle
- Stainless steel barrel
- Thumb and index finger grips for more comfort and control
- Compatible with studs that have a 3.5mm or smaller shaft
$21.95
- AM5200: specific tool for ACS Crossfire freewheels, fits over both 3/8" and 14mm axles
- AM5201: spanner wrench for Crossfire and universal 4-slot freewheels
- AM5203: specific to Paws, Paws HD, Paws 4.1 and gray Southpaw freewheels. A reinforcement ring inside the prongs allows firm centering and maximum torque. Tool is NOT compatible with CLAWS, SHIMANO, and some other freewheels
- AM5205: universal 4-prong that fit Claws, Fat, Southpaw, Shimano, Dicta, and other 4-slot freewheels
$21.95
- AM5200: specific tool for ACS Crossfire freewheels, fits over both 3/8" and 14mm axles
- AM5201: spanner wrench for Crossfire and universal 4-slot freewheels
- AM5203: specific to Paws, Paws HD, Paws 4.1 and gray Southpaw freewheels. A reinforcement ring inside the prongs allows firm centering and maximum torque. Tool is NOT compatible with CLAWS, SHIMANO, and some other freewheels
- AM5205: universal 4-prong that fit Claws, Fat, Southpaw, Shimano, Dicta, and other 4-slot freewheels
$30.00
Suspension service is a specialty within bicycle repair, and it takes specialized tools to perform this work. One of the things that any factory tech will tell you is nice to have are sockets specifically made or altered for the low profile hex on the top of each fork leg. The lead-in or chamfer on a standard socket will greatly decrease the contact between tool and part and can easily scratch or deform those nuts. For years shops have been grinding down their sockets to remove the chamfer. The problem is that you're still often left with a loose-fitting socket that is still prone to chewing up those delicate parts. That's why we started from scratch.
We made our sockets from billet aluminum to exacting tolerances to keep these parts in good shape. Fully CNC-machined with zero lead-in, they make the specialty that is suspension service a little bit easier. They feature a 3/8" square drive for use with your favorite torque wrench as well as finger splines to help run the top caps into the fork legs with those oil soaked hands. We also kept them short (1" or 25mm for all sizes) to reduce the chance of them slipping off of the top cap under torque.
- Made from billet aluminum to exacting tolerances to keep form damaging the suspension
- Finger splines so you can thread it easily by hand
- 3/8" square drive
- Short (1"/25mm for all sizes) to reduce the chance of them coming off of the top cap under torque
- Made in Bend, Oregon
Applications
- 24mm socket - used on SRAM top caps
- 26mm socket - used on Marzocchi and Reverb sealheads
- 27mm socket - used on Fox and X-Fusion top caps
- 30mm socket - used on the RS-1 SRAM sealhead removal tool as well as a handful of other forks.
- 6-size set covers most modern suspension forks on the market: 24, 26, 27, 28, 30 and 32mm
$40.00
This bottom bracket socket is for use on BSA30 12-notch bottom brackets, such as SRAM DUB, Rotor, Race Face Cinch, and many others that use this common tool interface.
Made with the same top-shelf aluminum alloy to the same exacting fit and tolerance as the rest of our socket range, these sockets won't chew up your shiny new bottom bracket.
$40.00
This tool is compatible with all outboard bearing cups that our dual-sided Shimano socket doesn't fit, including Campagnolo, SRAM, FSA, and older Shimano.
These gems start as a 7075 aluminum billet and get precisely machined. We take the time to put some nice deep finger splines in this tool so you can thread the cup into the frame by hand with those greasy fingers you haven't washed in a while.
- Hard anodized and laser-engraved with torque specs.
- Use your favorite 3/8" square drive ratchet or torque wrench to tighten it down.
$42.00
All the awesomeness of the dual-sided tool but in a single Shimano or Campagnolo version. Updated in 2020, the single-sided tool now has the same size handle (1/2 inch) as the dual-sided tool.
- When purchasing the chain whip, buy the 1/2-inch handle chain whip.
$45.00
While most other manufacturers cast or forge their bottom bracket tools, we machine ours for greater precision. Whenever you're dealing with anodized surfaces, great care needs to be taken to keep those surfaces from getting marred, gouged, and stripped out. That can be nearly impossible with some spanner style tools, and difficult with other loose-fitting sockets.
The most unique feature about this tool is the inner nub; that nub in the center of the tool is the same size as the crank spindle. What this does is give you a second point of contact that keeps the tool from coming off of the part when trying to remove stubborn cups.
This dual sided socket is designed to work with the new Shimano DA-9000/XTR-BB93 bottom bracket as well 6800 Ultegra and 5800 105 11spd groups (BBR-60).
$47.00
The Whip-It maximizes function and simplicity. Made from a 12-inch length of stainless steel, it gives you enough leverage to loosen even the most stubborn cassettes. The Whip-It's round handle provides comfort surpassing other flatbar-style chain whips on the market. The icing on the cake is that Abbey's signature tool, the Crombie, stores inside the handle of the Whip-It; this means the two tools you use together get stored together and travel together, creating less clutter in your tool box.
$53.00
The Crombie tool is a game changer when it comes to swapping cassettes.
Whether you're a professional mechanic swapping cassettes several times a day or a DIY kind of guy, this gem has a place on your tool bench. The first time a quick release spring rolls under your bench the Crombie tool paid for itself. If you like to remove the cassette for a detailed cleaning or just swapping from one cassette to another, it's a big time saver and a breeze to use. This version of the tool has a Shimano/SRAM remover on one side with a Campagnolo on the other. A precision machined spline ensures maximum engagement and durability.
The STANDARD version comes with a solid handle which gives the tool some mass making it the preferred choice in the shop. The SUPER LIGHT version shaves 125 grams out of the handle. SL handles are plenty durable for lockrings that are torqued close to the 40 NM spec. If you commonly come across over torque lockrings get the standard handle!
$53.00
The Geiszler is a stepped adapter designed to work with every thru-axle fitment currently on the market: 12x142, 12x150, 15x100, 20x110, Lefty and 24 Maverick. The tool will allow precision dishing without removal, a notable time saver when wheel building.
The Geiszler can be bolted into the hub with the included stud for serious wheel work. It can also be slipped into place for minor adjustments and retained by the compression of the truing stand. This simple tool eliminates clutter around your truing stand and keeps you from searching for the right adapter.
- Made in Bend, Oregon
- Bolts and washers for use with single-armed wheel stands are available upon request, for free
$53.00
With thru axles becoming more and more common, the original Crombie tool was due for a makeover. We took the piloting pin and plus-sized it to work with the 12mm thru axle fitment that is actually standardized. We make this version as a dual-sided tool with two S Group ends, one for thru axle wheels and the other for regular hubs. The regular side has a hole deep enough to hide a skewer nut; it's really the best of both worlds.
- Comes with a solid handle
- Note: this version of the Crombie tool is not compatible with any Campagnolo wheels.
- Dimensions: 9.625in x 1.0in
$60.00
- A precision multi-tool is a great addition to the shop at home or work
- More robust tool than the compact 4 way
- Constructed from stainless steel both frame and WERA bits
- Available in 2 preconfigured options
- Also available as a set which includes: tool frame, 2, 2.5, 3, 4, 5, 6 hex bits, T10, T15, T20, T25, T30 Torx bits, #2 jis Phillips and 1mm slotted screwdriver bits
- Made in the USA; Bend, Oregon
$60.00
- A precision multi-tool is a great addition to the shop at home or work
- More robust tool than the compact 4 way
- Constructed from stainless steel both frame and WERA bits
- Available in 2 preconfigured options
- Also available as a set which includes: tool frame, 2, 2.5, 3, 4, 5, 6 hex bits, T10, T15, T20, T25, T30 Torx bits, #2 jis Phillips and 1mm slotted screwdriver bits
- Made in the USA; Bend, Oregon
$63.00
The Crombie tool is a game changer when it comes to swapping cassettes.
Whether you're a professional mechanic swapping cassettes several times a day or a DIY kind of guy, this gem has a place on your tool bench. The first time a quick release spring rolls under your bench the Crombie tool paid for itself. If you like to remove the cassette for a detailed cleaning or just swapping from one cassette to another, it's a big time saver and a breeze to use. This version of the tool has a Shimano/SRAM remover on one side with a Campagnolo on the other. A precision machined spline ensures maximum engagement and durability.
The STANDARD version comes with a solid handle which gives the tool some mass making it the preferred choice in the shop. The SUPER LIGHT (SL) version shaves 125 grams out of the handle. SL handles are plenty durable for lockrings that are torqued close to the 40 NM spec. If you commonly come across over torque lockrings get the standard handle!
$63.00
With thru axles becoming more and more common, the original Crombie tool was due for a makeover. We took the piloting pin and plus-sized it to work with the 12mm thru axle fitment that is actually standardized. We make this version as a dual-sided tool with two S Group ends, one for thru axle wheels and the other for regular hubs. The regular side has a hole deep enough to hide a skewer nut; it's really the best of both worlds.
This SUPER LIGHT version has a hollow handle to save weight for the traveling mechanic. SL handles are plenty durable for lockrings that are torqued close to the 40 NM spec.
- Note, this version of the Crombie tool is not compatible with any Campagnolo wheels.
- Dimensions: 9.625in x 1.0in
$120.00
- A precision multi-tool is a great addition to the shop at home or work
- More robust tool than the compact 4 way
- Constructed from stainless steel both frame and WERA bits
- Available in 2 preconfigured options
- Also available as a set which includes: tool frame, 2, 2.5, 3, 4, 5, 6 hex bits, T10, T15, T20, T25, T30 Torx bits, #2 jis Phillips and 1mm slotted screwdriver bits
- Made in the USA; Bend, Oregon
$126.00
With a 15mm box end on one end and a custom 6 and 8 millimeter swivel bit on the opposite end, it's the only pedal wrench you'll ever need. Perfect to keep at the fit station, on the sales floor, and at the tool bench.
The shop version of the tool gets an extra 6" (15cm) of leverage over the team issue for an overall length of 18 inches. Great for removing those stubborn pedals.
- Durable black Cerakote finish
- Made in Bend, Oregon
$185.00
Two years in the making, this chain tool is built to stand the test of time.
The threaded body and lead screw are made from cro-moly and receive a low friction powder vapor deposition (PVD) coating to give it a silky feel you've never felt in a chain tool before. Large handles ensure ease of use with any chain. The freely rotating pin is made from a shock rated tool steel and will likely last as long as the rest of the tool. The chain tool comes with a spare chain pin in the handle and they are cross-compatible with Shimano and Campagnolo pins.
The greatest part of the chain tool has to be the interchangeable mid plate. The saddled part that holds the chain in position can be swapped to work with nearly anything the industry comes out with. This ensures that your investment won't become obsolete when company "X" comes out with an 18-speed cassette in 20 years.
The tool also peens Campagnolo 11 and 12 speed chains to factory specs using a backstop that threads into the backside of the tool as a stop.
Compatible with 9-12 speed chain, including the new 12-speed chains from Campagnolo and Shimano's XTR 9100.
$300.00
- A bearing removal tool that uses an expanding cone that goes behind the bearing and allows you to remove it while tightening the nut
- Protects components during usage instead of using a hammer and punch
- Compatible with bearing inside diameters from 12 to 20mm and outside diameter 24 to 37mm
- Commonly used for hubs and suspension linkage bearings
- Designed by Noble Tools in London England and made in the USA; Bend, Oregon
$9.90
- Replaces original Shimano bleed fitting with easy to use lever reservoir bleed fitting
$15.94
- Internal valve prevents air from being drawn into the system
- Includes one Quick Bleed valve and 2 sections of bleed tubing
$63.90
- Features bleed fittings for Hope, Magura, Avid, Hayes, Formula and Gatorbrake
- Includes bleed tubes, syringes, gloves, and handy carrying case
- See BTI part number AX-9617 for Shimano bleed fitting
$4.00
Designed to fit snugly between the disc brake caliper pistons or pads, preventing inward pad movement to preserve hydraulic brake adjustment while the wheel is off the bike..
- For disc caliper repair
- Fits SRAM Guide, Trail, and Avid Code Brakes
$17.99
Keep your brakes performing at their best with Avid's DOT 5.1 Brake Fluid. They're compatible with all Avid disc brake seals. You'll get a 4-ounce bottle of fluid.
$64.00
Essential parts to properly service and maintain all Avid CODE brakes.
- Replacement parts for 2007-2010 CODE brakes
- Includes bearings, bearing press tool, pivot bolt, cam, cam spring, and lever
$14.99
Adjusting chain tension is quick and easy with the new Box Three™ Chain Tensioner. With a single-hole "lollipop" design, these tensioners reduce weight and help keep your rear wheel locked in place.
Features:
- New and Improved
- 20mm of Adjustment
- Single Axle Position
- Slotted for Dropout
- ED Black Hardware
- Anodized Finish
Specs:
- Axle Size 10mm (3/8") only
- Material 6061-T6 Aluminum
- Hardware
- Stainless Steel
$29.99
Box One Chain Tensioners are extruded then CNC-machined from 7075 aluminum for an optimal balance of strength and weight. A minimalist design adds style while reducing their overall mass. Laser-etched graphics include wheel position guides and two 10mm mounting holes with 15mm of adjustment to ensure perfect adjustability. Fits most frames every time you remove and replace your wheel.
When used correctly, Box One tensioners will protect your frame dropouts and hold your rear wheel in place. Keep in mind. However, they aren’t indestructible (neither are your dropouts). Install these lightweight chain tensioners with care and leave the 15-inch breaker bar in your toolbox.
Features:
- New and Improved
- 45mm of Adjustment
- XO Skeleton Design
- Dual-Sided Adjustment Grid
- Dual-Color Adjustment Block
Specs:
- Axle Size: 10mm (3/8") only
- Material: 7075-T6 Aluminum
- Hardware: Stainless Steel
$8.50
- Set contains 9 CrMo wrenches with satin chrome finish plus ABS T-handles
- 25 degree angle entry offers easy access, even in tight spaces
- Set includes: 2mm—150 x 60mm, 2.5mm—150 x 60mm, 3mm—150 x 60mm, 4mm—150 x 60mm, 5mm—200 x 75mm, 6mm—200 x 75mm, 8mm—200 x 78mm, 10mm—200 x 78mm, T25—150 x 60mm
$11.00
- Tire levers for use on both tubed and tubeless tires and wheels
- Features a curved edge which mates up with wheels, providing more contact
- Designed with both a spoke hook and a rim clip to hold lever in place when needed, preventing slippage
- Includes 3 levers
$12.00
- Metric and Imperial readings up to 3m/10ft in length
- Stainless steel construction with polymer housing
$16.00
- A Y-wrench that features a swivel sleeve that allows the tool to rotate freely around the center point
- Features a magnetic panel to enable fast storage on metallic objects such as a work stand
- Available as: 4/5/6mm hex key, 4/5/6mm ball point hex key, T10/T25/T30mm Torx key, or 2/2.5/3mm hex key
$23.80
The Birzman Housing and Cable Cutter provides great handling comfort and is designed to offer additional leverage strength.
The integrated awl helps restore cut housing ends, clearing the way for smooth cable operation.
$25.00
- 9 piece Torx key set constructed from S2 steel
- Set includes: T10/T15/T20/T25/T27/T30/T40/T45/T50 keys and holder
$25.20
- Use for installing star-fangled nuts on 1 to 1 1/8" threadless headset systems
$32.00
- A handy multi-tool equipped with a large chain rivet panel for ease of use
- Aluminum body construction with Chrome Vanadium tools and aluminum chain tool
- Tools include: Hex keys 2/2.5/3/4/5/6/8mm, Torx key T25, crosshead screwdriver#1, and 9-12 speed chain tool
$47.40
- Compatible with 5-12 speed; 3/32" and 1/8" single speed chains
- Features a Smart Cradle System which is adjustable, use with almost all chains
- Full aluminum construction with S2 steel pin
$125.00
- 1/4" drive torque wrench (3-15Nm) and bit sockets
- Sockets include: 3/4/5/6/8mm hex, T25, and 90mm extension bar
$292.95
- Designed to be taken anywhere, this portable tool kit is great for mechanics on the move
- Contains a collection of 20 carefully selected pieces from Birzman's portfolio of high performance tools
- See inset photo or visit http://www.birzman.com/products1/22.php?uID=2&cID=30&Key=299 for list of included parts
$519.75
- A carefully selected tool set to tackle both basic and advanced repairs
- Collection of 37 carefully selected pieces from Birzman's portfolio of high performance tools and includes a tool box
$15.00
- Freewheel remover for use with single speed 4-key freewheels
- Can be used with a 24mm wrench
- Compatibility: 4-Key
$28.99
- For use on 8-key single speed freewheels
- Tool Type: Freewheel Remover
- Compatibility: 16-22T smallest cog (Gray)
- Compatibility: 13-14T smallest cog (Silver)
$6.00
This item contains 10 replacement plugs for the Blackburn Plugger Tubeless tool (sold separately), a one-shot tire plugging system for tubeless tires. It deploys in seconds to give a permanent fix for your flat.
$19.99
Pocket Power
Hit the road or trail carrying everything you need for basic repairs or adjustments in one handy, compact case. This tiny yet super functional kit includes T25 and T30 torx bits, 2.5, 3, 4, 5, and 6mm Allen bits and a flathead screwdriver. Individual T- or l-handle tools let you access tight places and give you more leverage on bolts and screws.
- 8 functions
- Includes T or L handle wrenches.
- Tool bits include: T25, T30, 2.5mm, 3mm, 4mm, 5mm, 6mm and a flathead.
- Pocket sized nylon carrying pouch includes a stash for your I.D., credit card and cash.
- 0.30Lbs
$20.00
Those guys who said "Tubeless tires never get punctures"? They lied. The Blackburn Plugger Tubeless Tire Repar Kit is a quick, one-shot tire plugging system for tubeless tires. It deploys in seconds to give a permanent fix for your flat. Mount it to your frame, tape it to your top tube, or strap it to your ankle like a shark knife. Just keep it close and it'll get you out of trouble. Pronto.
- Stores ten plugs.
- 27g tool only 47g tool with strap
$41.99
What’s better than one plug? Two plugs. And why not add a P/V core tool since you’ll have to re-tubeless-ify an ailing tire anyway? The Pro Plugger expands on the success of the original Plugger - known for its double-wrapped plugs to seal real-world marring - and adds CNC alloy construction, an even more compact and convenient design, and still packs 5 refills into its pared-down and minimalist physique. Elegant? Of course. Smart? Indeed. Quickly accessible? Why yes - faster than bear spray.
- 10 Plugs, Presta valve core tool, strap for top tube or seatpost
- 2.24oz
$69.99
Going for a ride but don't know what to pack? No problem, Blackburn has you covered. The new Local CO2 Ride Kit offers up what you need to get home, and extra carrying capacity to bring along anything else.
- Local Small seat bag offers extra space to pack your tube, wallet, phone, or whatever you want
- Wayside CO2 inflator with 16g cartridge
- GRID 8 Mutli-tool provides a quality tool to make sure your bike is adjusted properly for your ride
- 2x tire levers
$69.99
Ride essentials. Going for a ride but don’t know what to pack? No problem; we’ve got you covered. The local ride kit offers up what you need to get home; and extra carrying capacity to bring along anything else.
With a seatbag, mini pump, mini tool and tire levers, this little kit, bundled in a compact package, has all the tools you need to get out there and keep going.
- Blackburn's Local Seat Bag (Medium) offers extra space to pack your tube, wallet, phone, or whatever you want
- Blackburn Heist 6 Multi Tool provides a quality tool to make sure your bike is adjusted properly for your ride
- Blackburn's Mountain AnyValve Mini-Pump comes equipped with their popular and proven AnyValve head, which works on Presta, Schrader, and Dunlop valves.
- 2x tire levers
$13.99
- Workshop Gold kit includes: includes 100 ml of Gold hydraulic oil, lever end syringe with special plug and a caliper end TPX syringe for easier handling, spare o-rings, brass adapter for road brake levers, bleed blocks for both MTB and road, wrench, velcro strap and gloves
- Premium Gold kit includes: 100 ml of Gold hydraulic oil, syringes (with special plug at the lever end), spare o-ring, bleed block (MTB), wrench, velcro strap and gloves
- Premium Red kit includes: 100 ml of Red mineral hydraulic oil, syringes (with special plug at the lever end), spare o-ring, bleed block (MTB), wrench, velcro strap and gloves
- Workshop kit includes: lever end syringe with special plug and a caliper end TPX syringe for easier handling, spare o-rings, brass adapter for road brake levers, bleed blocks for both MTB and road, wrench, velcro strap and gloves
- Premium kit includes: syringes (with special plug at the lever end), spare o-ring, bleed block (MTB), wrench, velcro strap and gloves. No fluid included
- Basic kit includes: syringes (with special plug at the lever end), spare o-ring. No fluid included
$29.99
- Workshop DOT kit includes: 100 ml of Gold hydraulic oil, a lever end syringe with special plug and a caliper end TPX syringe for easier handling, a spare o-rings, a brass adapter for road brake levers, bleed blocks for both MTB and road, wrench, velcro strap and gloves
- Ultimate DOT kit includes: 250 ml of Liqui Moly DOT 5.1 fluid, syringes, two M5 fittings, edge fitting, spare o-rings, bleed block, torx wrench, velcro strap and gloves
- Premium Edge DOT kit includes: 250 ml of Liqui Moly DOT 5.1 fluid, syringes for the lever and caliper ends, M5 and edge fittings for the lever and caliper ends, spare O-rings, bleed block, torx wrench, velcro strap and gloves
- Workshop kit includes: TPX syringes, two M5 fittings, edge fitting, spare o-rings, bleed block, torx wrench, velcro strap and gloves. No fluid included
- Ultimate kit includes: syringes, two M5 fittings, edge fitting, spare o-rings, bleed block, torx wrench, velcro strap and gloves. No fluid included
- Premium Edge kit includes: syringes for the lever and caliper ends, M5 and edge fittings for the lever and caliper ends, spare O-rings, bleed block, torx wrench, velcro strap and gloves. No fluid included
- Basic kit includes: syringes, two M5 fittings, edge fitting, plus spare o-rings. No fluid included
- Basic Edge kit includes: syringes, M5 and edge fittings for the lever and caliper ends, plus spare o-rings. No fluid included
$33.99
- Workshop DOT kit includes: 100 ml of Gold hydraulic oil, a lever end syringe with special plug and a caliper end TPX syringe for easier handling, a spare o-rings, a brass adapter for road brake levers, bleed blocks for both MTB and road, wrench, velcro strap and gloves
- Ultimate DOT kit includes: 250 ml of Liqui Moly DOT 5.1 fluid, syringes, two M5 fittings, edge fitting, spare o-rings, bleed block, torx wrench, velcro strap and gloves
- Premium Edge DOT kit includes: 250 ml of Liqui Moly DOT 5.1 fluid, syringes for the lever and caliper ends, M5 and edge fittings for the lever and caliper ends, spare O-rings, bleed block, torx wrench, velcro strap and gloves
- Workshop kit includes: TPX syringes, two M5 fittings, edge fitting, spare o-rings, bleed block, torx wrench, velcro strap and gloves. No fluid included
- Ultimate kit includes: syringes, two M5 fittings, edge fitting, spare o-rings, bleed block, torx wrench, velcro strap and gloves. No fluid included
- Premium Edge kit includes: syringes for the lever and caliper ends, M5 and edge fittings for the lever and caliper ends, spare O-rings, bleed block, torx wrench, velcro strap and gloves. No fluid included
- Basic kit includes: syringes, two M5 fittings, edge fitting, plus spare o-rings. No fluid included
- Basic Edge kit includes: syringes, M5 and edge fittings for the lever and caliper ends, plus spare o-rings. No fluid included
$34.99
- Premium Gold TRP kit includes everything for bleeding TRP / Tektro and flat bar Shimano hydraulic brakes
- Kit includes: Lever end 30 ml transparent funnel (syringe body) with brass M5 thread. Brass M5-M6 adapter for TRP / Tektro hydraulic brakes. Threaded stainless steel plug (oil stopper) with hanger. Caliper end 20 ml syringe with a long-lasting tube. Bleed block for 2 and 4 piston brakes. Rubberized one side hook and loop strap, 25 cm (for securing the caliper syringe to frame or fork). 7mm wrench. T15 wrench, spare o-ring, and fluid
- Kit is compatible with all TRP / Tektro and flat bar Shimano hydraulic brakes (XTR, XT, Saint, Zee, SLX, Deore, Alivio, Acera, Alfine, Metrea)
$39.99
- Workshop DOT kit includes: 100 ml of Gold hydraulic oil, a lever end syringe with special plug and a caliper end TPX syringe for easier handling, a spare o-rings, a brass adapter for road brake levers, bleed blocks for both MTB and road, wrench, velcro strap and gloves
- Ultimate DOT kit includes: 250 ml of Liqui Moly DOT 5.1 fluid, syringes, two M5 fittings, edge fitting, spare o-rings, bleed block, torx wrench, velcro strap and gloves
- Premium Edge DOT kit includes: 250 ml of Liqui Moly DOT 5.1 fluid, syringes for the lever and caliper ends, M5 and edge fittings for the lever and caliper ends, spare O-rings, bleed block, torx wrench, velcro strap and gloves
- Workshop kit includes: TPX syringes, two M5 fittings, edge fitting, spare o-rings, bleed block, torx wrench, velcro strap and gloves. No fluid included
- Ultimate kit includes: syringes, two M5 fittings, edge fitting, spare o-rings, bleed block, torx wrench, velcro strap and gloves. No fluid included
- Premium Edge kit includes: syringes for the lever and caliper ends, M5 and edge fittings for the lever and caliper ends, spare O-rings, bleed block, torx wrench, velcro strap and gloves. No fluid included
- Basic kit includes: syringes, two M5 fittings, edge fitting, plus spare o-rings. No fluid included
- Basic Edge kit includes: syringes, M5 and edge fittings for the lever and caliper ends, plus spare o-rings. No fluid included
Page 1 of 27
Next page